Feedback on BMW Scanner 1.4.0

[aidilj]

hyee all the sifuss,,
my asc light worn out...
when scan my car the error show this:
on DME : Signal, CAN ASC 1, timeout elapsed
on EGS : CAN Timeout ASC
on IKE : No CAN message(asc1)



need help on this...if anybody kena like this?what to do?

Looks like faulty ASC module, how about trying to read from the (ASC) module itself? likely you have to swap the module. I know bro clavenk had this problem before. Drive moderately in the wet as there is no assist available until the problem is resolved.

 

[astroboy]

hyee all the sifuss,,
my asc light worn out...
when scan my car the error show this:
on DME : Signal, CAN ASC 1, timeout elapsed
on EGS : CAN Timeout ASC
on IKE : No CAN message(asc1)



need help on this...if anybody kena like this?what to do?

1. How old is your car battery? Weak battery will cause car electronic to become haywire and DSC/ABS/ASC module is one such example.

2. When was the last time you change brake fluid? Dirty brake fluid can cause the DSC/ABS/ASC pump to become sticky and throw out alarms. Brake fluid should be change every 30k km or no more than 2 years, which ever comes first, with the correct fluid, with the correct change procedure.

3. Can this be the wheel speed sensor? But I remember wheel sensor on the wheel has separate fault code of it own.

 

[azhar1788]

Looks like faulty ASC module, how about trying to read from the (ASC) module itself? likely you have to swap the module. I know bro clavenk had this problem before. Drive moderately in the wet as there is no assist available until the problem is resolved.

thankx bro..look like have to swap lar with other module,,,but the prob is the asc light sometime come and somtime dint come..

 

[azhar1788]

1. How old is your car battery? Weak battery will cause car electronic to become haywire and DSC/ABS/ASC module is one such example.

2. When was the last time you change brake fluid? Dirty brake fluid can cause the DSC/ABS/ASC pump to become sticky and throw out alarms. Brake fluid should be change every 30k km or no more than 2 years, which ever comes first, with the correct fluid, with the correct change procedure.

3. Can this be the wheel speed sensor? But I remember wheel sensor on the wheel has separate fault code of it own.

hye boss....my battery is 4month old..bout he brake fluid im not sure bcose im using this car only 6month,,have to check history back..about wheel speed sensor i have no idea..but i thing its has thier own fault code..

 

[Alex5522]

hye bro..why not you just screenshot the scanner result as bro Jarance mentioned so that we can share our experience 2u.

An example :-

 

[Xthree]

hye bro..why not you just screenshot the scanner result as bro Jarance mentioned so that we can share our experience 2u.

An example :-

hello sifu's , where can i get this bmw scanner 1.4.0 . how much rm ? . any club member have an extra to let go ...

thanks

 

[anaksarawak]

I have a new unit of bmw scanner 1.4

 

[Xthree]

I have a new unit of bmw scanner 1.4

Thank you for the offer bro . I've already purchase it . Thank you again

- - - Updated - - -

I have a new unit of bmw scanner 1.4

Thank you for the offer bro . I've already purchase it . Thank you again

 

[kw930]

I have a new unit of bmw scanner 1.4

Hi bro, is your new scanner 1.4 still available? If yes, I'm intereted.

 

[888881]

dear Sifu....,

Need help.... my car cant startup and all the electronic was ok and i'm able to switch on the light and signal but it just wont start/crank up. When i ignition the car it come with tak tak takk sound after i cleared some errors with the 1.4 scanner tools. What could have been wrong?
there are no more error showing on the car..... please help.

Please help.....

 

[888881]

Solved..

 

[antiquer]

How?... battery?

 

[888881]

Yea...

Sent from my GT-N7100 using Tapatalk

 

[Kim1980]

hello sifu's , where can i get this bmw scanner 1.4.0 . how much rm ? . any club member have an extra to let go ... thanks

My scanner costs about 75rm, shipped from Singapore for free.

 

[carlon cai]

Link?

 

[Kim1980]

Link?

I've sent you a pm

 

[carlon cai]

Thanks bro. I was thinking of the following:
http://www.uobd2.net/wholesale/creator-c110-bmw-code-reader.html
Any ideas? And what is the difference between C110 and BMW Scanner 1.4.0?

 

[Kim1980]

I don't have a C110 so I can't tell. I got a bmw scanner at half the price and it has never failed to do anything I have needed it to do.

 

[carlon cai]

You would be greatly appreciated for any information on BMW Scanner 1.4.0 software offered to me.
Thanks in advance!

 

[Kim1980]

Check this out: http://blog.obd365.com/2014/05/24/where-to-download-free-bmw-scanner-v1-4-0-software/