GB for OBD-II Scanner - for E46/E39/E85/E83/E38

[zun]

Testing..View attachment 19571

 

[aidilj]

thanks bro..hmm..manage to run INPA using the download from 4shared. able to read live data but for some reason it is not in English. I may have installed./updated it wrongly. at least for now i am sure that the cable works. will try to re install it. GT1 still not able to connect yet. need to read more on it. from INPA i saw that there might be something wrong with my lamda sensor? how many do we have in N42? 4 is it? i think 2 of it is in red. will post the screen shot later. Fixed my leaking. Thnk God coz before this it was drinking engine about a liter within a week. cleaned and changed the oil filter and the gasket. did an oil change total inclusive labor just RM 426 ( harga kawan2 at my friend workshop in USJ ) Hopefully no issue after this. went to genting last week to test and no reduction to my engine oil so far.

I've installed mine from 4shared as well, mostly in english, very small portion of it in German but overall usable. Check your installation again.

Not sure how many lambda sensors N42 have, not an expert in this.. sorry. Probably realoem.com can tell.

 

[zun]

testing..

 

[zun]

Is this normal?

 

[jarance]

Is this normal?

yes, this is normal. You need to turn the Ignition key to "ON". and press "SCan" to detect all the module.

 

[zun]

Page 1 displays all the related errors, but page 2 and 3 all displayed not found. Ok will try again later.

jarance,

What should i do with the errors? What button should i click next?

 

[jarance]

Page 1 displays all the related errors, but page 2 and 3 all displayed not found. Ok will try again later.

jarance,

What should i do with the errors? What button should i click next?

Page 2 and 3 are for special modules. if the scanner does not detect the presence of the module, it will remain blank.
This is normal.

When you have error, check the error first. Take a screenshot so you know the history.
Clear the error by clicking the "Error Clear" button. If the error is not present, it will clear the
error. If the error is still register or display, that means that the alarm is present and require
you to check with your mechanic to rectify the problem.

 

[redhybrid]

hi! does anyone with the scanner can help me out checking a car for me?

 

[haywire]

testing..

You're in love with the R8 isit.....wanna change camp? hehe

 

[jarance]

hi! does anyone with the scanner can help me out checking a car for me?

bro, you are not going to get very far when you dont specify where is the location, what type check is required and what type of car/model.

 

[redhybrid]

batu caves.. e46 325 SSG. will PM you.

 

[jarance]

batu caves.. e46 325 SSG. will PM you.

Can somebody help redhybrid? He is planning to buy the car and is not sure whether the car is
in good condition or not. The used car dealer is located in Batu caves.

Sorry, I cant help you as I am located in Klang and also outstation most of the time.

 

[JFT63]

Bro jarance, is this scanner suitable for OBD1? mine is m52 523i e39..thanks

 

[jarance]

Bro jarance, is this scanner suitable for OBD1? mine is m52 523i e39..thanks

No, this scanner cannot read OBD-I. You need the Dcan cable and INPA program to read the OBD-I.
In addition you need a 20 pins round connector to D-type adpator to use it.

Maybe you can try to use BMW scanner version 1.3.6 which is design for older model. haywire is selling his scanner
after he have upgraded to Ver. 1.40.

 

[hky]

testing..

I noticed yours has a reduced rear axle ratio. Does it means more torque to the rear wheel and slightly higher FC?

 

[tweiboon]

I can help. I got the scanner. You looking for 2nd hand car from 2nd hand car shop ?

 

[redhybrid]

tweiboon,

thanks very much!!i will drop u a pm.
actually, already finish with the look see look see...

 

[jarance]

Bro jarance, is this scanner suitable for OBD1? mine is m52 523i e39..thanks

On second thought, I think M52 ecu is OBD-II if i am not mistaken. Need to try to it out.

 

[bmw7833]

Jarance, i think JFT' car spec is same with me, using the round pins socket.

 

[jarance]

Jarance, i think JFT' car spec is same with me, using the round pins socket.

If that is the case, then the Scanner 1.40 can be used with the 20 pins adaptor.