e36 parts & maintenance

  • Click here to become an Official Member of BMW Club Malaysia Download Form
1. Fan belt - 197
2. Fan belt tension pulley (top) - 48
3. Air-cond belt - 31
4. Air-cond belt tensioner - 88
 
Been a while since I've last updated.

1. Refill gas and compressor oil - RM 110
2. Half year road tax for M52B28 - RM 815.95 (MyEG) -> Price of Ultimate Driving Machine's Sheer Driving Pleasure. :D
3. 4 wheel balancing & alignment - RM 73
4. Clutch sleeve pump - RM 145
5. Standard lube job, inc oil filter, air filter - RM 276
6. Brake fluid (inc clutch also) - RM 35
7. Vacuum Hose + 2 hose clips - RM 62 -> Solve my idling problem. Details here: http://www.bmwclubmalaysia.com/forums/showthread.php?38239-E36-328-vibrating-during-idling
 
castelo;660112 said:
Engine Gasket with valve seal RM 500

Gasket or gaskets ?

13/08/2011
Fixed oil leaks, below is the breakdown.

Valve cover gasket RM80
Stud seals (think thats what its called) RM75 (RM5 each)
Oil sump gasket RM70
Oil pump gasket RM35
Engine bushing RM260 (RM130 each)

Labour price not listed.

I'm officially broke =(
I low income & kuli worker ma

But good service from the place I went, satisfied!
 
went to shah alam tyres just now.check in at 10 and check out at 1230.duh!

off wheel balancing - RM 10x2
servis brake - RM 16
change brake fluid - RM 55
alignment - RM 45
on wheel balancing - RM 15x2

the mechanic said front camber cant be adjusted.is it true?
goin to search for e36 alignment/balancing thread. huhu!
 
Got my car on 10/08/2011.

What I've spent on her so far are


Changed Auto Transmission Fluid + Filters + Labour = RM 330 (Did it at my regular Mechanic, Hup Seng)
Changed Rear Absorbers + Labour = Rm 600 MSpeed
Changed Front Brake Disc + Brake Pads (OEM) + Labour = RM 700 MSpped
Changed to Drop in K&N Air Filter = RM 250 Bought from Speedworks Online, DIY

Bought Beisan Vanos Seal from Crymson but haven't installed yet = RM 100

Grand total = RM 1,980

More to come~
 
oil filter (from BA) - rm18
shell engine oil from taman maluri car sparepart shop (4liter x 2) - rm65 x 2
labour to change engine oil, air filter cleaning and normal car checking (workshop is next to my office lot) - rm15
p/s: get my car ready for balik kampung hari raya
 
Chrix;660860 said:
Gasket or gaskets ?

13/08/2011
Fixed oil leaks, below is the breakdown.

Valve cover gasket RM80
Stud seals (think thats what its called) RM75 (RM5 each)
Oil sump gasket RM70
Oil pump gasket RM35
Engine bushing RM260 (RM130 each)

Labour price not listed.

I'm officially broke =(
I low income & kuli worker ma

But good service from the place I went, satisfied!

I'm also kuli maa...but, the driving pleasure is worth the moneh spent right?
 
JFT63;665529 said:
I'm also kuli maa...but, the driving pleasure is worth the moneh spent right?

me also kuli. that's why i can only afford to buy second hand 14years old car. price below 35k. perodua myvi is more expensive than my current car. :rolleyes:
 
Yup, myvi is more expensive..they buy myvi bcos they cant afford BMW and we buy BMW bcos we cant afford Myvi..hows that? hehe

Just realised yr car is still running on the stock engine and GB..well done bro, hopefully it will clock 500k mark soon
 
azmee007;666311 said:
bro fitri jusop,

Kat mane svc brake tu. Bagi address wksp kat i. no tel sekali. thank you


kt shah alam tyres, lot 53 jln utas 15/7 sek15,shah alam
btol2 seblah rounabout kdai warne kuning.
 
fitri jusop;664542 said:
went to shah alam tyres just now.check in at 10 and check out at 1230.duh!

off wheel balancing - RM 10x2
servis brake - RM 16
change brake fluid - RM 55
alignment - RM 45
on wheel balancing - RM 15x2

the mechanic said front camber cant be adjusted.is it true?
goin to search for e36 alignment/balancing thread. huhu!

their offer to adjust front camber - will set you back another 250-300.
the camber cannot adjust, they use some kinda pump device - force!
no doubt they do good on-wheel balancing, but this doesn't sound right.
every car i take there been offered the same?!?!
know you r reading this .. :)
 
Damage for today, done at DU Tyre at Damansara Utama

Brake Switch Replacement + Labour = Rm 145

The dude charged me 40 bucks for the workmanship (for a brake switch replacement. seriously? for something that took less than 15 minutes to do :hmmmm2: :stupid: ) I know i did ask him for a lot of stuffs regarding my gearbox. don't tell me he charged me as well for all the advice he's given.
 
clovi5;668216 said:
Damage for today, done at DU Tyre at Damansara Utama

Brake Switch Replacement + Labour = Rm 145

The dude charged me 40 bucks for the workmanship (for a brake switch replacement. seriously? for something that took less than 15 minutes to do :hmmmm2: :stupid: ) I know i did ask him for a lot of stuffs regarding my gearbox. don't tell me he charged me as well for all the advice he's given.

Why didn't you go to your regular mechanic to get it fixed instead to a tyre shop? 40bucks is a bit steep..
 
pardypeople;668222 said:
Why didn't you go to your regular mechanic to get it fixed instead to a tyre shop? 40bucks is a bit steep..

It's not really a tyre shop. its a workshop that services cars. But they also sells tires as well (they have 2 shoplots side by side. 1 servicing 1 tyre shop). I was liking the service. Until the last bit i found out about the price.

I definitely need to try and find Albert's of Ah Wai's workshop.
 
Is anyone else's facing the problem of sensor connectors (those to the washer level sensor/fog light/etc..) falling apart? The plastic has literally turn to dust in the engine bay, any idea where/how to replace these little gems?
 
clovi5;668216 said:
Damage for today, done at DU Tyre at Damansara Utama

Brake Switch Replacement + Labour = Rm 145

The dude charged me 40 bucks for the workmanship (for a brake switch replacement. seriously? for something that took less than 15 minutes to do :hmmmm2: :stupid: ) I know i did ask him for a lot of stuffs regarding my gearbox. don't tell me he charged me as well for all the advice he's given.

that is expensive...i changed the brake switch last year for less than RM100...can't recall the exact price but i think it was around RM80++ (no workmanship charge)
 
Top Bottom