Windows Tinting

[saat]

WHATEVER YOU DO STAY AWAY FROM V-KRAP

READ MY EXPERIENCE HERE

http://www.bmwclubmalaysia.com/forum...rap&highlight=

 

[RH5]

WHATEVER YOU DO STAY AWAY FROM V-KRAP

READ MY EXPERIENCE HERE

http://www.bmwclubmalaysia.com/forum...rap&highlight=

loud n clear buddy..! i think i have read it twice... :top:

 

[xero200]

After about 2 weeks on the 3M tint, I'd say it's been satisfactory. My car's sophisto grey and so far the heat reduction has been commendable. I travel at least 2-3 times on Toll roads and if you go really slow, the reader's still readable. The TTDI 3M guys did a pretty good job with installation and mine's together with anti-smash. PM me if you need the rep's contact.

 

[namidub]

Huper Optik installed.

Hi.just sharing with you guys.
Did my huper optik Ceramic 70 on the FWS and Ceramic 40 on the rest of the windows yesterday.

Browsed through the distributor list at Smart Window and called up to ask for the price.
Called up some shops located in pj, kota damansara and klang, most of them quoted RM2250-2600.
Was expecting sub-2k so i continued calling,this time CK Tint Auto,located at Taman Kinrara,puchong.Ah keong quoted me RM1500 and its a done deal! Also did the coil carpet. total damage was only RM1650.

Workmanship was good.i stayed there and monitor the work from 10.30am til 1.00pm.
2 men working inside a sealed air conditioned shop. Satisfied so far.heat rejection was good (yesterday's outside temperature was 35C) Smart tag working fine.No problem with the autogate remote as well.:top:

Pics of pre,installing,and post.

View attachment 19361View attachment 19363View attachment 19364

 

[jovial8]

Hmmmm ... Another good option other than v-kool ....

 

[RH5]

Hi.just sharing with you guys.
Did my huper optik Ceramic 70 on the FWS and Ceramic 40 on the rest of the windows yesterday.

Browsed through the distributor list at Smart Window and called up to ask for the price.
Called up some shops located in pj, kota damansara and klang, most of them quoted RM2250-2600.
Was expecting sub-2k so i continued calling,this time CK Tint Auto,located at Taman Kinrara,puchong.Ah keong quoted me RM1500 and its a done deal! Also did the coil carpet. total damage was only RM1650.

Workmanship was good.i stayed there and monitor the work from 10.30am til 1.00pm.
2 men working inside a sealed air conditioned shop. Satisfied so far.heat rejection was good (yesterday's outside temperature was 35C) Smart tag working fine.No problem with the autogate remote as well.:top:

Pics of pre,installing,and post.

View attachment 19361View attachment 19363View attachment 19364

NAMIDUB, were u in Dublin before..? nice ride anyways.. very nice deep look... altho i would not dare to install 40..

were you convinced that its the original huper optik they are installing..? no offence here... but seems like its too good to be true as everybody else were charging more..?

 

[namidub]

hi RH5,

no i wasnt in Dub before..

at first i thought want to install only 50,but somehow my evilside managed to convince me to install the 40.

Regarding the authenticity,yes.they are one of 40 authorised distributor nationwide,the film comes with huper optik label embossed on the plastic cover,so i believe they are genuine.

 

[RH5]

hi RH5,

no i wasnt in Dub before..

at first i thought want to install only 50,but somehow my evilside managed to convince me to install the 40.

Regarding the authenticity,yes.they are one of 40 authorised distributor nationwide,the film comes with huper optik label embossed on the plastic cover,so i believe they are genuine.

great, i might give them a ring when im back.. thanks

 

[namidub]

a friend of mine just came and his 318ci is also huper optik-ed for the same price like mine,did his somewhere in KL,but couldnt remember wher
so it isnt that too good to be true.just that some installers want to charge more,i guess..

 

[serenum]

had my mom's 520d tinted with 3M crystalline 70 for front windscreen and the rest Cystalline 50. Done at TTDI 3M outlet. I didn't take anti smash film because the tint will be thick and scared that it will affecting the power window.

Very good workmanship and very satisfied with the tint. thx to xero200 for recommending the shop in this forum.

 

[RH5]

had my mom's 520d tinted with 3M crystalline 70 for front windscreen and the rest Cystalline 50. Done at TTDI 3M outlet. I didn't take anti smash film because the tint will be thick and scared that it will affecting the power window.

Very good workmanship and very satisfied with the tint. thx to xero200 for recommending the shop in this forum.

Serenum, mind to share some pictures of the end result..? I am also thinking to get the Crystalline 50 as well..

Thanks

 

[alpina b5]

Serenum, mind to share some pictures of the end result..? I am also thinking to get the Crystalline 50 as well..

Thanks

also helped my friend did the tinting on her car (not a bmw). must say the job was very well finished and professionally done. Also thanks to Xero 200 as he also recommended the shop to me.

 

[xero200]

You're most welcomed guys! Yeah, the TTDI 3M guys did a pretty sordid job & their handling of my car during installation was very detailed and careful. Recommended!

 

[serenum]

ok i will take pictures in daylight. should take cyrstalline 40 because crystalline 50 still not too dark.

 

[serenum]

as requested.


taken at crystal mosque , kuala terengganu




drove from kl to kuala terengganu and back to kl in single tank of diesel. 998km traveled. ( sorry, does not related with tint )

 

[alpina b5]

as requested.


taken at crystal mosque , kuala terengganu




drove from kl to kuala terengganu and back to kl in single tank of diesel. 998km traveled. ( sorry, does not related with tint )

was ur car a 520d? on the day u did ur tinting was there a red r8 there? XD

 

[RH5]

Serenum,

Thanks for the pics, thats look dark enough for me..!! :41:

Btw, what were u doing in Terengganu? running in your F10..?

 

[xero200]

I've been using 3M Crystalline 60 on my windshield and 40 for the rest. So far, after a few weeks, the heat resistance has been good, no qualms. In passing the Smart Tag toll, I found that if I go super slow and wave the Smart Tag a bit, it works fine.

 

[RH5]

doubleposting

 

[RH5]

I've been using 3M Crystalline 60 on my windshield and 40 for the rest. So far, after a few weeks, the heat resistance has been good, no qualms. In passing the Smart Tag toll, I found that if I go super slow and wave the Smart Tag a bit, it works fine.

xero200, it would be great if you could post some pictures here...?? :top:

I think 3M in TTDI owes u a big thanks for the good recommendation u made..! And I think I will be heading there too..!