damn i think just blew my engine....318 l4 is a gonner l6 325 hehehehehe

[s1tl]

last night when i was driving a friend back home suddenly the engine oil light turned on. car started to act weird. on ilde 500rpm only! almost died off then suddenly it went to 100rpm and could not rev it up. had to double signal and stop at the road side.parked at the available parking space till this morning. when i opened the engine oil cover...sad look on my face as water + engine oil = f**ked up...my mechanic says either i overhaul now which wil cost me 3k or i translate a 325 that cost me 7k before selling off the usable parts...so i think my nexct project will be coming real soon.. damn fresh paint just out of factory less than a week now went in again =( im so so sad

i was even suppose to get a set of 18" BBS this week fitted with tyres onto her... seems like it will have to wait...have u blown ur engine before?

 

[ICEMAN 68]

dude ..pls don't think that you'll able to gain much by selling off those usable parts ....many of them get this thing wrong that there are able to get another rm3K or more by selling those usable parts from the 4 potter ...

yehh get the 6 potter for once and for all ...you'll smile away with the power gain ...

all i could say is spend a little bit more and do it the right way and do not compromise into shortcuts ....

 

[stig]

How u plan to settle JPJ dude? 318 -> 325 more than 30%... unless u plan to submarine or don't tell hehehe

 

[dzuljazz2001]

How u plan to settle JPJ dude? 318 -> 325 more than 30%... unless u plan to submarine or don't tell hehehe

no issue stig ... if its the same body and chasis, 318 ->> 325 is permissable :top: .. btw, nice paint job there s1tl :top: ... and yeah, keep in mind ICEMAN13 sound advise... :top::top::top:

Good luck and all the best in your upcoming project bro ..

 

[maxxsp]

How u plan to settle JPJ dude? 318 -> 325 more than 30%... unless u plan to submarine or don't tell hehehe

He can go 318 > 320 then from 320 stroke to 325.

 

[jeffreyewe]

I prefer to rebuild, cost more but i maintain the originality. But then again it's personal preference.

http://www.bmwclubmalaysia.com/foru...ay!-Mayday!-White-KNight-DOWN....!&highlight=

My two cents

 

[firdaus325]

jeff...
how much it cost for the rebuilt..

 

[s1tl]

dude ..pls don't think that you'll able to gain much by selling off those usable parts ....many of them get this thing wrong that there are able to get another rm3K or more by selling those usable parts from the 4 potter ...

yehh get the 6 potter for once and for all ...you'll smile away with the power gain ...

all i could say is spend a little bit more and do it the right way and do not compromise into shortcuts ....

yea i will spend on the half cut first then depending on situation, settle the engine first then only reduce the costing. Thanks bro for the advice.

How u plan to settle JPJ dude? 318 -> 325 more than 30%... unless u plan to submarine or don't tell hehehe

hehehe actually my workshop says it can be done so i leave it to them for 2 months and come and pay the bill lol

no issue stig ... if its the same body and chasis, 318 ->> 325 is permissable :top: .. btw, nice paint job there s1tl :top: ... and yeah, keep in mind ICEMAN13 sound advise... :top::top::top:

Good luck and all the best in your upcoming project bro ..

but actually i prefer the 4potter but becoz real bmw is 6potter so i rather go for real bmw power. anyhow overhauling will cost 3k, transplant will cost 7k why not go all the way right? (inspired by mizhan xD)

I prefer to rebuild, cost more but i maintain the originality. But then again it's personal preference.

http://www.bmwclubmalaysia.com/foru...ay!-Mayday!-White-KNight-DOWN....!&highlight=

My two cents

yes im totaly with u on this i really love the 4potter..but its been bored getting smoked by more powerful bimmers got bored sonner or later so its a oportunity for an upgrade =)

jeff...
how much it cost for the rebuilt..

full rebuild i think will cost around 4-5k? equivalent to a half cut

 

[s1tl]

by the way! thanks for the compliment on the paint job. its Subaru Imprezza blue =D sharp colour altho underpowered i dont really mind coz i like to let ppl droll and i cruise xD was suppose to go 18" too but i think its gonna have to wait. im also a detailer so the paint is professionally maintained by OPTIMUM POLYMER TECHNOLOGIES' Products...

 

[jeffreyewe]

jeff...
how much it cost for the rebuilt..

Too much as practically changed everything inside the engine to every bolt and nut at the end the feeling was awesome some sort of a lost romance rekindled....hahaha

 

[BlackE90]

Bro s1tl, nice color on your ride...I love this color much.
Oh, if you need assistance and/or opinion about your engine, go to Toyzmech, in Taman Mayang. They can provide you the necessary information pertaining to rebuilding or transplant. Here's the contact:

ToyzMech Sdn Bhd
Lot 79, Jalan SS25/32,
Taman Mayang 47301 Petaling Jaya
Selangor Darul Eshan, Malaysia.
Tel: +60 (3) 7804 7950

 

[bmw7833]

Blackie, i think s1tl live in Ipoh la..

 

[initialM]

I prefer to rebuild, cost more but i maintain the originality. But then again it's personal preference.

http://www.bmwclubmalaysia.com/foru...ay!-Mayday!-White-KNight-DOWN....!&highlight=

My two cents

Yup I prefer originality too. With the ori VIN no you wont go wrong. The beauty of BMW with the car certificate birth you can order almost everything

 

[BlackE90]

Blackie, i think s1tl live in Ipoh la..

Oh...ya ka? In my opinion whether is Ipoh or Johor, its still worth sending the ride to Toyzmech. Its the QUALITY & EXPERTISE service that counts, don't you think so?

 

[ramsing]

why dont you get a 6 potter, and stroke to 3.2 with 3.2 cams. guaranteed smile on your face every day hahaha.

 

[BlackE90]

why dont you get a 6 potter, and stroke to 3.2 with 3.2 cams. guaranteed smile on your face every day hahaha.

Oooi...someone is working hard.....!!! Putting lotsa poison la wei...

 

[stig]

Yeah prefer the 4 potter balance... 6 potter can smoke you on the straights but you'll smoke them through corners...

 

[s1tl]

Too much as practically changed everything inside the engine to every bolt and nut at the end the feeling was awesome some sort of a lost romance rekindled....hahaha

YES! hahaha

Bro s1tl, nice color on your ride...I love this color much.
Oh, if you need assistance and/or opinion about your engine, go to Toyzmech, in Taman Mayang. They can provide you the necessary information pertaining to rebuilding or transplant. Here's the contact:

ToyzMech Sdn Bhd
Lot 79, Jalan SS25/32,
Taman Mayang 47301 Petaling Jaya
Selangor Darul Eshan, Malaysia.
Tel: +60 (3) 7804 7950

haha yea im from Ipoh its quite troublesome for me to tow it all the way there lol

Blackie, i think s1tl live in Ipoh la..

how did u know!?

Yup I prefer originality too. With the ori VIN no you wont go wrong. The beauty of BMW with the car certificate birth you can order almost everything

yea i prefer originality buy hmmm bmw should be a 6potter?? anyone??

Oh...ya ka? In my opinion whether is Ipoh or Johor, its still worth sending the ride to Toyzmech. Its the QUALITY & EXPERTISE service that counts, don't you think so?

yea thanks for the headup tho might be usefull too

why dont you get a 6 potter, and stroke to 3.2 with 3.2 cams. guaranteed smile on your face every day hahaha.

poison poison @@

Oooi...someone is working hard.....!!! Putting lotsa poison la wei...

i think he suceeded

Yeah prefer the 4 potter balance... 6 potter can smoke you on the straights but you'll smoke them through corners...

haha stig u r totaly right, i think the e36 318 handle very well at cornering exit especially at cameron which i usually do my runs at haha


well guys the mechanic is removing the engine and my next engine will be an M50B25 =D trying to get manual too but lets see wad can be done

 

[bmw7833]

how did u know!?

Because i know magic..lol..

 

[s1tl]

Because i know magic..lol..

Hahaha u r a funny fella la