POISONED! I can't stop looking at new stuffs to buy

[NCH]

Actually don't know if the 19" 313s are meant for my car .. just plug & play or need spacers of some sort?

 

[NCH]

Pulled this from E90post

There are 3 variants of 313:

313 as standard on 335is: no M logo, no BMW Performace wording
313M: with M logo
313 Performance: With BMW Performance wording

They have in 2 sizes. 18" & 19"

Autofuture can get them in 1.5 months ... decisions decisions ..

 

[E46Fanatic]

Pulled this from E90post

There are 3 variants of 313:

313 as standard on 335is: no M logo, no BMW Performace wording
313M: with M logo
313 Performance: With BMW Performance wording

They have in 2 sizes. 18" & 19"

Autofuture can get them in 1.5 months ... decisions decisions ..

The design is nice and rear offsets suit the LCI more than pre-LCI if I remember right. Your existing 193M wheels on the rear will have more aggressive offset and stance vs. the 313 wheel which is a shame. Also too bad they are cast wheels. It'll be perfect if they were forged instead. Not cheap either!

 

[sunnypuan]

Too late Sunny.......U will always be attracted to these Threads starting with 'BMW Performance Parts'.........more racun to come..........Thats what the wife told u but until now, the mods are still continuing........:rock::rock::rock:

Bro, to be honest I thinking using HIOP remap ! Still doing research on the tuning as I need to install all hardware like intake and exhaust before do the remapped. Hope it won't cost a bomb though...

I was tailgated by a 1990 Honda accord at 180km/hr in NKVE 2 weeks ago ! Darn... that Accord was fast...:thefinger:

 

[NCH]

my car is an LCI.

By more aggressive offset, do you mean negative offset?

Ohh 313M are cast wheels not forged? I thought otherwise ..

 

[E46Fanatic]

my car is an LCI.

By more aggressive offset, do you mean negative offset?

Ohh 313M are cast wheels not forged? I thought otherwise ..

Yes they are Cast wheels. Here are the offset details for the 313 wheel.

ET39 on the rear! Also fronts are ET37. Stock 193m fronts is ET34 if I remember right. Bummer.

I am running 9.5 on the rear and ET30 on the pre-LCI.

 

[NCH]

18" 193M

Front:
8x18 225/40R18 ET 34 (313M ET 37)

Rear:
8,5x18 255/35R18 ET 37 (313M ET 39)

How do the increased offsets affect the look?

 

[E46Fanatic]

Shorter track width with the 313 wheel. Tyre/wheel will be tucked back in instead of out from the fender. Sucky look if you ask me .

Spacers can fix this.. but after paying so much for the wheel, you won't wanna play with spacers. Might as well get a forged wheel with nicer offsets IMHO.

This is more like it...HRE P40s FTW!

 

[gilajazz]

BMW Performance Kidney Grille

Bro NCH,

More good poison for a friend...

Don't forget Performance Black Kidney Grille (see pic). The original Performance grille is gloss black on the outer kidney, and matt black on the inside vertical fins. The 'underwater' grille is matt black only, and will dis-color over time.

Only cost RM550 i think...reasonable priced. Poison that won't kill...

cheers.

 

[stanleycck]

Bro NCH,

More good poison for a friend...

Don't forget Performance Black Kidney Grille (see pic). The original Performance grille is gloss black on the outer kidney, and matt black on the inside vertical fins. The 'underwater' grille is matt black only, and will dis-color over time.

Only cost RM550 i think...reasonable priced. Poison that won't kill...

cheers.

I was waiting for this...........Icing on the Cake...............

 

[stanleycck]

Bro, to be honest I thinking using HIOP remap ! Still doing research on the tuning as I need to install all hardware like intake and exhaust before do the remapped. Hope it won't cost a bomb though...

I was tailgated by a 1990 Honda accord at 180km/hr in NKVE 2 weeks ago ! Darn... that Accord was fast...:thefinger:

I think that by the time yr re-map is done.........the HM will sure sell the car..............eeekkkkk...:vroam:

 

[stanleycck]

Bro, to be honest I thinking using HIOP remap ! Still doing research on the tuning as I need to install all hardware like intake and exhaust before do the remapped. Hope it won't cost a bomb though...

I was tailgated by a 1990 Honda accord at 180km/hr in NKVE 2 weeks ago ! Darn... that Accord was fast...:thefinger:

I believe that a 1.8 or 2.0liter car 16Valve like the Accord can reach those speeds..........BUT can they maintain it??.......Thats where yr beast can have a better edge. On Saturday ( 29th ) as I was on the way back to Pg, I was having fun with a MK5.......he was a good sport......we were about 185 from Sg Perak onwards when a Camry 2.4 cucuk me........I believe that I hit the 200 mark for just for a few seconds before the Camry eased off.........

 

[gilajazz]

U tapau camry ahh??

bro stanley,

Yr 6-potter E90 323i sure can tapau 2.4 Camry la...switch to Sport mode, and while ur on 180 km/h, bring down one gear, like 6th to 5th, then tekan and u can say bye bye Camry...

cheers.

I believe that a 1.8 or 2.0liter car 16Valve like the Accord can reach those speeds..........BUT can they maintain it??.......Thats where yr beast can have a better edge. On Saturday ( 29th ) as I was on the way back to Pg, I was having fun with a MK5.......he was a good sport......we were about 185 from Sg Perak onwards when a Camry 2.4 cucuk me........I believe that I hit the 200 mark for just for a few seconds before the Camry eased off.........

 

[stanleycck]

bro stanley,

Yr 6-potter E90 323i sure can tapau 2.4 Camry la...switch to Sport mode, and while ur on 180 km/h, bring down one gear, like 6th to 5th, then tekan and u can say bye bye Camry...

cheers.

Jeff........using the Paddle Shifters..........that's what I did...........he was smelling my smoke..........

 

[astroboy]

When Camry 2.4 hit above 200, they can only drive straight.. but my 4-potter can't keep up if the road is clear..

 

[NCH]

Bro NCH,

More good poison for a friend...

Don't forget Performance Black Kidney Grille (see pic). The original Performance grille is gloss black on the outer kidney, and matt black on the inside vertical fins. The 'underwater' grille is matt black only, and will dis-color over time.

Only cost RM550 i think...reasonable priced. Poison that won't kill...

cheers.

I got the aftermarket matte black one for about RM280. I didn't know the Performance ones only cost RM550 otherwise I would have gone after them.

Where do you get it this price btw?

 

[gilajazz]

In my dreams...

AB,

After our expereince yesterday afternoon in the 380 bhp 335i...nothing else can keep up lawei...smoke everyone on d highway to Klang...not even a 325 in full throttle with engine remap & Performance parts upgrade, whatmore a 320...

Hmm...prices for 335i are falling this year...

cheers.

When Camry 2.4 hit above 200, they can only drive straight.. but my 4-potter can't keep up if the road is clear..

 

[Spaceman]

Shorter track width with the 313 wheel. Tyre/wheel will be tucked back in instead of out from the fender. Sucky look if you ask me .

Spacers can fix this.. but after paying so much for the wheel, you won't wanna play with spacers. Might as well get a forged wheel with nicer offsets IMHO.

This is more like it...HRE P40s FTW!

+1..........

 

[NCH]

car prices are falling everyday ...

What's your favourite 335i?

Mine has to be E92 LCI M-sport in Alpine White

 

[gilajazz]

nch,

U can get everything fr Adrian of Stuttgart. Thy deal with original BMW parts. And some OEM parts too...but definately not 'under-water' stuff. All my stuff are fr him...Best prices and special discount for BMW Club Members. I spoke to him abt yr interest in 313 rims just now & I asked him to give u a good price bcos ur a 'friend'.. He also said 'my' BMW Performance Suspension & Spring & Anti Roll Bars are in! But i don't remember ordering it...hehe...

cheers.

I got the aftermarket matte black one for about RM280. I didn't know the Performance ones only cost RM550 otherwise I would have gone after them.

Where do you get it this price btw?