GB for K + D Can USB Cable (INPA compatible)

  • Click here to become an Official Member of BMW Club Malaysia Download Form
Status
Not open for further replies.
Ichi, if the sensors kaput totally you will definitely feel the lost of power. I am trying to interprete your INPA reading, haven't use it for a while. Best to use DIS , it has a step by step guide with intepretation of the reading.

I am not sure the sensors can fit N42.
 
IanDaddy;653989 said:
In case you need, I have 2 pre-cat O2 sensors for M54B25. They are in working condition. I swapped them out with new ones but did not have any significant effect on my FC or power.

I just changed my o2 sensor and I does feel the engine is more responsive. FC on the OBC show about 9.2 L/100Km.
Too early to tell but my butt dyno tell me otherwise. However cannot clear the O2 shadow alarm using the BMW scanner.
Will use INPA to clear it later.
 
ichi82;653910 said:
bro jarance..is my lambda sensor kaput?

Do you have any error when you scan the DME?

O2 sensor failure will give you error message.
 
ichi82;654055 said:
Tried to use DIS but it unable to detect my cable connection..

I think it time to buy iandaddy a drink and makan to teach us to use/install DIS/GT1.

Let arrange a technical session one afternoon at MMZ, Bukit Jelutong.

pss..sst.. I also never got my GT1 to work lar.. but I am happy with the INPA program.

too lazy to study for PHD (permanent head damage).
 
My first attempt was by installing everything into my work laptop, which already has a lot of software, applications, drivers etc.

I guess it's best get a cheapo new lappy dedicated to car diags.
 
seewai;654066 said:
My first attempt was by installing everything into my work laptop, which already has a lot of software, applications, drivers etc.

I guess it's best get a cheapo new lappy dedicated to car diags.


It would be better to buy a second hand old laptop that is working. Most of the program
are "old" program and operate at 16 bits and window 98.. haha yes window 98.

so go for old layot but make sure battery is OK. (which will cost more than the laptop)
 
i want to reset my service counter as i already done my oil service and gasket change to fix my leaking prob at my friend place..he don't have the tool to reset it..he is good restoring E36 below but just started open his own workshop..thts why want to use GT1..
 
Jarance,

IIRC they don't show up in INPA/DIS though they do in BMW Scanner.
I recently moved office and traffic pattern is so different it is hard to gauge FC. I also always sit in at least half hour idling in the traffic or stop-go traffic, horrible. No chance to travel out of KL/PJ, even to Klang.
Short distance test cruising at Kesas , the FC show just under 8L/100KM. Think I should use my City to commute to work.
 
IanDaddy;652943 said:
Can share the VM ?

IanDaddy, the VM image is long gone after I learnt that I don't need VM on my machine.. That is probably an updated version of INPA that I stumbled upon last time.

ichi82;653699 said:
can i reset my service counter using INPA?my GT1 unable to connect?

ichi82;654099 said:
i want to reset my service counter as i already done my oil service and gasket change to fix my leaking prob at my friend place..he don't have the tool to reset it..he is good restoring E36 below but just started open his own workshop..thts why want to use GT1..

ichi82, you don't need INPA or GT1 to reset the service counter..

[video=youtube;0kEqkoorE3E]http://www.youtube.com/watch?v=0kEqkoorE3E[/video]
 
Posted by MONTOYA :

Smile DIY simple oil service reset.

got this from another forum. tested on a local 325i. it works like a charm. so like to share with you guy.


"To reset the indicator:
-The car should be off
-hold down the left instrument button (the trip odometer reset)
-while holding the key, turn the ignition to position 1 (radio)
-you will see a test menu
-keep holding the button
-after maybe 10 seconds, the word "reset" will appear
-let go of the button and press again
-THe indicator is reset!"


have funs.
 
jarance;654994 said:
The GB was RM170, mudah selling for RM570. why why why?

U are too kind la..What else.

I want to sell mine RM4oo, anyone? :4:
 
i sell mine also la...mr.jarancem when the technical session for the INPA?
haven't done installing yet....got step by step installation guide?
the readme file from CD not helping much or its me?
 
bmw7833;654990 said:
Jarance, the exactly scanner is selling 3 times higher here..fulamakkk..I think the seller got the idea from u la.

http://www.mudah.my/Bmw+scanner+for+e36+e38+e39+e46+-10637436.htm

jarance;654994 said:
The GB was RM170, mudah selling for RM570. why why why?

bmw7833;654995 said:
U are too kind la..What else.
I want to sell mine RM4oo, anyone? :4:


The mudah.com seller by name of Zack, I believe is one of our club guests. Quite an enterprising guy taking this scanner gadget and offering it to the public as a business.
 
herbert;655093 said:
The mudah.com seller by name of Zack, I believe is one of our club guests. Quite an enterprising guy taking this scanner gadget and offering it to the public as a business.

How nice if one is free enough to conduct such business, in ebay for example, under the name of our club and contribute the earnings to club fund.
 
ichi82;653704 said:
analog3.png


Advice needed

ichi82, I can get reading from my car then compare since I'm also driving N42. If that helps at all.
 
Status
Not open for further replies.
Top Bottom