[DIY] Angel eyes installation

  • Click here to become an Official Member of BMW Club Malaysia Download Form
Pictures hosted on the forum seems to not work anymore. I've updated the picture in the DIY to point to photobucket, pictures are now back up. Cheers.
 
Hi all sifus, need some advice on the angel eye ring sizes.
I just bought a set of angel eyes that come with all standard 131mm diameter.
My car is e46 4 doors new facelift with factory equip single xenon light, but after discussed with 1 e46 owner who's installed an AE earlier (same light as mine) claim that the correct size should be 2 big (146mm) + 2 small (131mm).
So, am I buying a wrong eyes? Or actually 4x 131mm also can fit?

I search through some online seller of AE and all claim 4x131mm should fit for my model, e.g :

http://store.ijdmtoy.com/BMW-E36-E46-E39-Halo-Ring-Angel-Eyes-p/80-110.htm
 
kw930 said:
Hi all sifus, need some advice on the angel eye ring sizes.
I just bought a set of angel eyes that come with all standard 131mm diameter.
My car is e46 4 doors new facelift with factory equip single xenon light, but after discussed with 1 e46 owner who's installed an AE earlier (same light as mine) claim that the correct size should be 2 big (146mm) + 2 small (131mm).
So, am I buying a wrong eyes? Or actually 4x 131mm also can fit?

I search through some online seller of AE and all claim 4x131mm should fit for my model, e.g :

http://store.ijdmtoy.com/BMW-E36-E46-E39-Halo-Ring-Angel-Eyes-p/80-110.htm
Check out this thread for more info on the size.

http://www.bmwclubmalaysia.com/newforums/index.php?/topic/21764-gb-for-smd-led-angel-eye-e36-and-e46/

or this
http://www.bmwclubmalaysia.com/newforums/index.php?/topic/25285-faq-smd-led-for-e36-e46/?hl=smd+led
 
jarance said:
Here is the link to the dimension of the rings.

http://www.bmwclubmalaysia.com/newforums/index.php?/topic/25285-faq-smd-led-for-e36-e46/page-6#entry456872

For facelift, you should use 2 big and 2 small.

For prelift, you should use all small.
Thanks for the link sharing.
Hmm...strange, wonder why all the online seller (almost all eBay seller) are claiming that 2 big (146mm) & 2 small (131mm) rings are only for prefacelift. For facelift with single projector must use all 4x 131mm.
Wonder is it a different mounting method? or is it the ring for the xenon light suppose to mount in between the projector and the shroud??

Here an example of an e-Bay seller claiming the 4x even ring sizes is meant for E46 xenon model :

http://www.ebay.com.my/itm/Brandneu-SMD-LED-Angel-Eyes-Standlichtringe-LED-Weis-BMW-E38-E39-E46-mit-Xenon-/190898952680?pt=LH_DefaultDomain_77&hash=item2c7276d9e8

http://store.ijdmtoy.com/BMW-E36-E46-E39-Halo-Ring-Angel-Eyes-p/80-110.htm

http://www.ebay.com.my/itm/4-x-CCFL-Angel-Eye-Halo-Rings-Light-Lamp-Kit-for-BMW-E36-3-E38-7-E39-5-E46-3-/171314382374?pt=Motors_Car_Truck_Parts_Accessories&hash=item27e3220626
 
jarance said:
up to you who to believe.
Sure I believe you since you all had done it before. Just curious to know is it 4x 131mm ring sizes also can be mounted with a different method.
 
Just look at the picture below.

Facelift : One big one small
Pre-facelift : 2 small rings

Yes you use 2 small rings. It will fit

e46prefaceliftCOMPARE.jpg
 
jarance said:
Just look at the picture below.

Facelift : One big one small
Pre-facelift : 2 small rings

Yes you use 2 small rings. It will fit

e46prefaceliftCOMPARE.jpg
Think I found a picture of mounting the projector headlight light using the smaller ring,it seems can be fit, just the angel eyes will not sit on the groove of the HID ring, but overlap the inner diameter.

Switchback-BMW-Angel-Eyes-06.jpg
 
this might be unrelated. anybody know where can i purchase headlamps with xenon projector beams? mine are all halogen. facelift model 02'.
 
Top Bottom