xcrave
Club Guest
- Joined
- Nov 16, 2010
- Messages
- 720
- Points
- 0
During the holidays i just installed some new eyes for my UDM as well as some minor mods to headlight... its still incomplete pending for my remote mods as well as a pair of new lens (my current one are cracked )These are the items ive ordered:Custom CCFL angel/demon eyes from an ebayer from ireland2 x Red CCFL ring2x White CCFL ring2 x Inverters (split for different ccfl rings --custom made from the guy)2 x Morimoto H1 Mini from retrofit source:
These are the after effects:I did not get much pictures since my hand was so dirty so i hope based on online DIY guides you guys can get more detailed info...This is where i tap my angel light source LCM box ... find the red white with gold band wire,I use a copper clip to tap from the clip... no tapping or cutting required... just slip it in the clip (secure with pliers) and tape so it will contact with the positive... http://www.bmwclubmalaysia.com/forums/attachment.php?attachmentid=19377This is the morimoto installed:http://www.bmwclubmalaysia.com/forums/attachment.php?attachmentid=19378Notice the clear Clear Morimoto H1 lens Lens on the shroud Some of the Mid and after Installation pics:http://www.bmwclubmalaysia.com/forums/attachment.php?attachmentid=19374http://www.bmwclubmalaysia.com/forums/attachment.php?attachmentid=19380http://www.bmwclubmalaysia.com/forums/attachment.php?attachmentid=19375Moded the beam to slant almost 30+ degrees Kampung road no light test:http://www.bmwclubmalaysia.com/forums/attachment.php?attachmentid=19379Road goin to my house test:http://www.bmwclubmalaysia.com/forums/attachment.php?attachmentid=19376Will post more picture (after ive change the lens and finish up my tuning for the light output)