RFT Warning

[QME7555]

Hello all the Sifu,I encountered a problem last nite while driving my bimmer at 80-100 km/hr. The RFT warning light enlight and saying that I got a puncture type and drive not exceeding 80 km/hr but after got down and checked all my tyres are okay. I'm using the 19" rim with psII tyres.

 

[thule]

why didn't you take your car to the nearest tyre shop??? something can't be seen through our naked eyes

 

[alxy]

Did u initiate your pressure detector properly?

 

[t2ribena]

Hello all the Sifu,
I encountered a problem last nite while driving my bimmer at 80-100 km/hr. The RFT warning light enlight and saying that I got a puncture type and drive not exceeding 80 km/hr but after got down and checked all my tyres are okay. I'm using the 19" rim with psII tyres.

do the following check list...

1. Did you reset/re-initialize the RFT Pressure monitor afta you have change the wheels or re-fill ur tyre with air? if no then reset via iDrive settings menu...

2. If yes to item 1, do inspection on your current tyre pressure. It could be one of them is loosing air slowly.

3. If the warning light still there, then does the warning light for DSC, ABS also lights up? If yes then you have an issue with the wheel speed sensor...

:top:

 

[QME7555]

Thanks to all the sifu. I think after changing the rims, didn't reset cause don't know much about bimmer. I has reset/re-initialize as per t2ribena and the warning light has gone. Thanks for the help.