E46 parts & maintenance

[wingzee]

ya Alex, where u got ur fuel filter. i just change mine yesterday cost me RM250

wsonny, RM250 is heavily overpriced. Part only cost RM90-100 max. Labor is about RM30-50.

 

[Volvos525i]

One Side Of The Drive Shaft Cover Broken And Replaced A New

Hi bro...
Just sharing this is not drive shaft boot or cover...
This is steering tie rod end boot or cover...cheers :top:

 

[gendong]

wsonny, RM250 is heavily overpriced. Part only cost RM90-100 max. Labor is about RM30-50.

ya lorr......rm250 is like the whole engine oil change routine.....including the engine oil + filter + workmanship

 

[Alex5522]

Everything you got is a lot cheaper than BA segambut or BOMIN or munich auto segambut. .. should show me how u get such deal

AS are you sure all my parts are a lot cheaper then you get ? If yes then then i guess you are much more riches then me that's why the parts supplier slaughter you kaw..LOL ! Just refer my parts pics did mentioned those all parts are getting from BA. I believe you too often visit their outlet too.

Tips 4u don't wear your Rolex King when visit their out let lar..just a joking ha..ha.. You need to negotiate lor with the sales guy to deal with better price

Bro Alex, fuel filter for only RM36?! Care to share the brand and place for such kangtao?

When to know that deflection pulley is required to be changed?

WZ- I change my fuel filter just cause i being suffering quite some time about my high FC which i believe my ICV was dirty refer my posting: http://www.bmwclubmalaysia.com/forums/showthread.php?46789-She-s-a-beauty.-Can-see-can-touch.-LoL&p=804139&highlight=#post804139
About the brand of this fuel filter i am not really sure lah and there was no any kangtao lar..bro

As my parts pics did mentioned All Parts Bought From Bavarian Auto maybe you can call up your regular BA outlet and ask them.

My deflection pulley got sound already that's why i change lor.

ya Alex, where u got ur fuel filter. i just change mine yesterday cost me RM250

Wsonny- As you are same rich like AS so you get slaughter kaw..kaw for RM250 only changing the fuel filter :102:?? LOL..

 

[anaksarawak]

Which BA outlet bro? I only wear seiko leh. Hahahhahaa

 

[wsonny]

Shit man.... My car still inside the workshop trying to fix the EML light problem. This time I feel very pain been slaughter

 

[udm68]

AS, for u the charges will still be expensive cos maybe your's is a GRAND Seiko ~ RM26K

 

[wingzee]

AS are you sure all my parts are a lot cheaper then you get ? If yes then then i guess you are much more riches then me that's why the parts supplier slaughter you kaw..LOL ! Just refer my parts pics did mentioned those all parts are getting from BA. I believe you too often visit their outlet too.

Tips 4u don't wear your Rolex King when visit their out let lar..just a joking ha..ha.. You need to negotiate lor with the sales guy to deal with better price



WZ- I change my fuel filter just cause i being suffering quite some time about my high FC which i believe my ICV was dirty refer my posting: http://www.bmwclubmalaysia.com/forums/showthread.php?46789-She-s-a-beauty.-Can-see-can-touch.-LoL&p=804139&highlight=#post804139
About the brand of this fuel filter i am not really sure lah and there was no any kangtao lar..bro

As my parts pics did mentioned All Parts Bought From Bavarian Auto maybe you can call up your regular BA outlet and ask them.

My deflection pulley got sound already that's why i change lor.



Wsonny- As you are same rich like AS so you get slaughter kaw..kaw for RM250 only changing the fuel filter :102:?? LOL..

Shoot, means I must query the BA near my place d. How can they charge me triple the price. Hurmph.

 

[wsonny]

How much is the VVT servomotor and throttle sensor cost

 

[softmuffin]

Oil change - DIY
1. LM engine flush
2. LM Synthoil High Tech 5W40
3. LM ceratec
4. Oil filter
Total Rm485

 

[Iceduke]

How much is the VVT servomotor and throttle sensor cost

bro, if urs is n42...the valvetronic motor cost around 1.1k brand new. But before changing try to check the smaller red power cables in the bonnet area first. Make sure its tighten as I have EML error when mine was even a slight movement.

If not check the valvetronic relay thats located at the ECU side, passenger side engine, where the fuse box is. hope this helps.

Cheers.

 

[asa_traxx]

As preventive and based on BMW SC schedule I need to replace the followings

Control arm bush RM 120 (M3) from Munich segambut
Long shaft bush (coupling) SGD 32 Lamforder from eng soon
Long shaft bearing BMW original SGD 65 from eng soon. You can also get febi from Munich segambut for RM80
Labour at autocraft sunway (ah loon) rm230 inclusive wheels alignment

Bro,

I bought a pair of control arm bush (Meyle) for RM215 (from BA). The one that you bought is cheap. difference of RM95.

Can the one you bough fit my 318i 2.0?

 

[wingzee]

Bro,

I bought a pair of control arm bush (Meyle) for RM215 (from BA). The one that you bought is cheap. difference of RM95.

Can the one you bough fit my 318i 2.0?

The one that AS bought is just the center bushing alone, without the mounts. Is yours the same?

That part is universal and fits all E46, regardless of trim and models. It's unbranded but known to be heavy-duty and made from solid rubber, just like the Meyle HD.

 

[asa_traxx]

The one that AS bought is just the center bushing alone, without the mounts. Is yours the same?

That part is universal and fits all E46, regardless of trim and models. It's unbranded but known to be heavy-duty and made from solid rubber, just like the Meyle HD.

Thanks wingzee.

Mine was the below. I thought it was the same parts. I can see that its different. Got it for RM215.

View attachment 30314

 

[anaksarawak]

Thanks wingzee.

Mine was the below. I thought it was the same parts. I can see that its different. Got it for RM215.

View attachment 30314

We didn't purchase the metal part just a replacement rubber. Anyway we have to pay for rm60 to press the rubber and rm80 fot workmanship. Total 90+60+80=230

 

[wingzee]

Thanks wingzee.

Mine was the below. I thought it was the same parts. I can see that its different. Got it for RM215.

View attachment 30314

RM215 for a pair is pretty reasonable I would say. Is it Meyle HD? (Usually stated).

 

[asa_traxx]

RM215 for a pair is pretty reasonable I would say. Is it Meyle HD? (Usually stated).

Yup. its Meyle HD. Plan to install it this weekend.

 

[wsonny]

Thank for ur info, I change the VVT servo motor cost me 650 if not mistaken

 

[hammer1911]

My car just came out from workshop this afternoon .Changed and replaced few items:
1.Central locking switch - RM 120
2. Powers steering rack(used) - RM 800
3.Brake pad sensor (front) -RM 50
4.Brake pad (one set) front-RM 140
5.Thermostat housing - RM 190
6.Flywheel oil seal- RM 105
7.Auto transmission fluid -RM 175
8.Power steering fluid - RM 25
9.Wheel alignment - RM 30
10.Labour charge- RM 450

Total - RM 2,085

 

[anaksarawak]

Bro... I think your price is some what expensive

1.Central locking switch - RM 120
2. Powers steering rack(used) - RM 800 (was quoted RM700)
3.Brake pad sensor (front) -RM 50 (RM25)
4.Brake pad (one set) front-RM 140 (RM100 ATE/TWR or TEXTAR RM110)
5.Thermostat housing - RM 190
6.Flywheel oil seal- RM 105 (FEBI RM65)
7.Auto transmission fluid -RM 175 (RM39 per liter ZF)
8.Power steering fluid - RM 25
9.Wheel alignment - RM 30
10.Labour charge- RM 450