E46 parts & maintenance

[shasall]

View attachment 29930

Hi Shasall don't mind to share which workshop is it ? cause i noticed you are from Seremban. Thanks

Bro Alex,

KL workshop not Seremban. Attached the receipt for your reference.[/I]

 

[anaksarawak]

Hi Guys,

Cold start this morning, RPM was erratic and engine even died once. So took to her to my mech. Found out ignition coil in cylinder 5 kaput. Changed and baby is good as new!

Cost: Ignition coil RM180 + RM50 labour.

Huh?? Why so mahal? E46, E39, E90 E60 ignition coil should cost around RM85-95 each. There youtube guide on how to replace it

 

[shasall]

Huh?? Why so mahal? E46, E39, E90 E60 ignition coil should cost around RM85-95 each. There youtube guide on how to replace it

Bro AS,

I was charged RM1200 to replaced all six in Seremban. Huh kena again.......:stupid:

 

[kby88]

Bro AS,

I was charged RM1200 to replaced all six in Seremban. Huh kena again.......:stupid:

Bought for my e46 at rm90/piece. Its from Bosh.

 

[Alex5522]

Bro AS,

I was charged RM1200 to replaced all six in Seremban. Huh kena again.......:stupid:

wow.. this one really kena potong kaw..kaw..which sucker workshop :26: was that ?

 

[lleejin]

Philip H7 2 sets for RM500
Matt black kidney grill RM280
Signal case RM180
Small LED at the headlight RM 60
Wiper Blade RM200
Total damage RM1,220

 

[haywire]

wow.. this one really kena potong kaw..kaw..which sucker workshop :26: was that ?

Mine for M54 is RM82 each from BA, total for 6 is RM492.

I think for M52/M52TU is a bit more expensive since it uses two parts, upper and lower can be sold separately. But still it shouldnt be RM1200.

Like you said, potong kaw kaw.

 

[aidilj]

Bought for my e46 at rm90/piece. Its from Bosh.

Thankfully only have to change four..

 

[Alex5522]

Mine for M54 is RM82 each from BA, total for 6 is RM492.

I think for M52/M52TU is a bit more expensive since it uses two parts, upper and lower can be sold separately. But still it shouldnt be RM1200.

Like you said, potong kaw kaw.

Bro..being asking before with BA, if not mistaken only rm100-120/pc with upper and lower. Bought one pc of the lower(Plug Socket) with part nos: 12139067831 cost me rm15 only. Replaced due to broken on last yrs Oct.

 

[M3kid]

aiya..u guys can email bvm auto and ask for the price ma...I think they can give cheaper...

 

[softmuffin]

first DIY for N42 timing chain tensioner RM85 - Bomin Auto

 

[shasall]

wow.. this one really kena potong kaw..kaw..which sucker workshop :26: was that ?

Alex,

Sorry i was away just came back. It was BMWorkshop senawang. Not sure if it is still there. Shop was closed the last time i passed by and sign board has been changed. After I was quoted 9.5k to rebuild the auto gearbox, never go there again.

 

[Alex5522]

Thanks for the feed bck shasall, yes i think which workshop you are mentioned. I believe the workshop still there and it's only change their name with the first words German XXX. Sorry is not good to publish the full name here. Fyi sikit lagi i get con by this workshop too, if that the workshop we are referring was the same one.

 

[shasall]

Thanks for the feed bck shasall, yes i think which workshop you are mentioned. I believe the workshop still there and it's only change their name with the first words German XXX. Sorry is not good to publish the full name here. Fyi sikit lagi i get con by this workshop too, if that the workshop we are referring was the same one.

Bro Alex,

Noted with thanks.

However, why can't we publish the name of bad workshops? We did promote good workshops as well right? For the benefit of the rest. Just my humble opinion.

 

[Alex5522]

I believe this is sensitive issue, so better don't or admin might answer your this question.

 

[shasall]

I believe this is sensitive issue, so better don't or admin might answer your this question.

Noted with thanks.

My apologies for the issue. I'm not aware of the forum terms and conditions.

 

[Alex5522]

Regular Oil Change and Wear & Tear parts replacement:-

1) Shell Ultra 5W - 40 = RM 99/4Lts
2) Bosch Oil Filter = RM 20/pc
3) Seleri Water Pump = RM 115/pc
4) Myle Deflection Pulley = RM 80/pc
5) Fuel Filter = RM 36/pc
6) Boot kit = RM 33/pc
7) Textar Front Brake Pad = RM 100/set
8) Jurid Rear Brake Pad = Rm 98/set
9) Water Hose = RM 96/pc
Labour charge = RM 250
----------------
Total RM 956.50

First time trying to use this Shell Ultra cause couldn't get the Castrol Edge 0 - 40W from Tesco Seremban

Bosch Oil Filter

All Parts Bought From Bavarian Auto

Water Pump To Be Change

Water Pump Being Dismantle

The Old Water Pump

Old One Going To Replace By The New

Replaced by The New

Changing Those Front & Rear Brake Pad From My Regular Hansom Mechanic

The Old Brake Pad Almost Gone

One Side Of The Drive Shaft Cover Broken And Replaced A New

Change The Deflection Pulley

Change This Water Hose Too

 

[anaksarawak]

Everything you got is a lot cheaper than BA segambut or BOMIN or munich auto segambut. .. should show me how u get such deal

 

[wingzee]

Bro Alex, fuel filter for only RM36?! Care to share the brand and place for such kangtao?

When to know that deflection pulley is required to be changed?

 

[wsonny]

ya Alex, where u got ur fuel filter. i just change mine yesterday cost me RM250