Bilstein B8 + Eibach Spring Problem

[bmwjackiee36]

Hi Bros, Check with you guys whether how many finger spacing if use B8 + Eibach Spring? Currently my front wheel is inside the fender..... Dun know what is the problem... Currently on 19in Rim, Front 245/35/19 Tyre.... Back has no issue.. Absorber is used set and Eibach Spring is also used set... Please advise whether it is at the correct height or absorber has issue or spring has issue.... ThanksJackie

 

[TheTaj]

Yes, Jackie

with Eibach spring, it is that low...

my car came with Eibach spring as well and 19" wheels (same size front as yours)

i've already changed to a set of used Bilstein PSS10 sourced from another forummer here (Thanks Richard) and now my ride is slightly higher in front.

Below pics of my car before it was registered;

 

[Damonzero]

The taj, where did u get ur bodykit? Mine same color as yours but couldn't find the kit with 4holes (pdc)

 

[TheTaj]

My car came with it...those pics were taken at the car dealer Ally Azran, Jln Ampang b4 the car was registered.

 

[bmwjackiee36]

Thanks Bro for the info....

 

[tay]

check your absorber mounting. i have the above setting, and after 2 to 3 years it will sink down a bit. once changed the absorber mounting and everything goes back to normal. about 1+ finger above the wheel. mine is a e39 though

 

[bmwjackiee36]

Any Bros out there know where to buy this item #12?View attachment 18580

I believe that it can solve the problem.

Thanks
Jackie

 

[TheTaj]

try bavarian auto parts..they have branches around klang valley...

http://www.bavarian.com.my/

 

[terencehilary]

Bro, ur rims are this replica?

 

[TheTaj]

Bro, ur rims are this replica?

Yes, i think they are. Can't seem to find any imprint on the rim itself of where the rims were made, no hints at all, just width and offset. Anyways the rims have just been sold and i'm running on staggered 18" since taking delivery of the car. Needed more ride comfort...

 

[hakim_radzuan]

Hi Bros,

Check with you guys whether how many finger spacing if use B8 + Eibach Spring?

Currently my front wheel is inside the fender.....

Dun know what is the problem...

Currently on 19in Rim, Front 245/35/19 Tyre.... Back has no issue..

Absorber is used set and Eibach Spring is also used set...

Please advise whether it is at the correct height or absorber has issue or spring has issue....

Thanks
Jackie

Spring normally dont have any problem i think. Maybe ur B8 are worn out already. Try change cheap item first like absorber mounting.