Whats the best configuration of ur racechip for F30 320i

[RickyChin]

Hey guys, Whats your configuration on ur racechip for f30 320i. Currently my setting is S1 - code 3 and S2 - code 0!

 

[Fadhlan]

This one you gotta talk to our OM Akhie in his black F30.

 

[omnimech]

Hi Ricky, Where did you get your race chip ? Have you dynoed for the figures ?

A couple of us have tried every setting on the race chip without any increase in torque or hp.

The root cause was actually due to the incompatible mappings in the chip.

We got Race Chip Malaysia to reconfigure the maps for us and it has shown a giant increase on the dyno.

At the optimum setting, we are getting about 205 hp and 305 nm torque on the wheel .. which is still shy of 328i figures, but its pretty close.

 

[Prot]

Hi Ricky, Where did you get your race chip ? Have you dynoed for the figures ?

A couple of us have tried every setting on the race chip without any increase in torque or hp.

The root cause was actually due to the incompatible mappings in the chip.

We got Race Chip Malaysia to reconfigure the maps for us and it has shown a giant increase on the dyno.

At the optimum setting, we are getting about 205 hp and 305 nm torque on the wheel .. which is still shy of 328i figures, but its pretty close.

Do share link for race chip information and price. thanks.

 

[Vynner]

205hp and 305Nm on wheels Wohoo!

Most of them goes on max setting!

 

[Mavik]

Those are indeed amazing figures from RaceChip!

 

[Prot]

205hp and 305Nm on wheels Wohoo!

Most of them goes on max setting!

share the dyno results or it didnt happen :65:

 

[Mavik]

share the dyno results or it didnt happen :65:

I have personally seen the dyno results or you can always head to GT Auto in Sunway and check out the computer which is attached to the dyno machines. You can see all of the dyno figures there including my current car as well as previous cars :65: :65: :65:

 

[wwliam]

Hello guys.. 205hp 305nm on wheels that's nice. May I ask stock hp n torque stated on 320i catalogue are wheel or engine result?

 

[JoeKenzoM]

Is it safe to be running it at max setting to get those numbers?

At the optimum setting, we are getting about 205 hp and 305 nm torque on the wheel .. which is still shy of 328i figures, but its pretty close.

 

[wwliam]

Omnitech mentioned optimum setting. Probably that's the safest.

I'm running Speedbuster and according to them, too high setting might cause the car to go into limp mode

 

[saat]

The following is the recommendation from Racechip Malaysia:

RON95, the optimum setting is 5/1,
RON97, you could go for 6/1 or even 7/1.