O2 Sensor Control Range Block ??

[clavenk]

aildij, this is mine, i capture this when september, but i don't really understand how to read this. I even try to use DIS, unit testing for both pre cat sensor, still the reading value is ok. successfully tested ok.

 

[aidilj]

aildij, this is mine, i capture this when september, but i don't really understand how to read this. I even try to use DIS, unit testing for both pre cat sensor, still the reading value is ok. successfully tested ok.

Bro, then it is not the O2 sensor, follow bro b33mer recommendations.

 

[Alex5522]

Agreed with bro aidilj you should try the recommendation from bro b33mer suggestion.

 

[cythomas83]

Today morning...my car totally canot start the engine...
my mech fren unplug my maf sensor socket and i started the car perfectly
so just changed the MAF sensor...but havent got time to scan it see still got pop out any fault code or not...will update u guys later...

btw...bro aidilj and clavenk...what scanner tools u guys use?
how much is this? i think i should buy one for myself

 

[aidilj]

Today morning...my car totally canot start the engine...
my mech fren unplug my maf sensor socket and i started the car perfectly
so just changed the MAF sensor...but havent got time to scan it see still got pop out any fault code or not...will update u guys later...

btw...bro aidilj and clavenk...what scanner tools u guys use?
how much is this? i think i should buy one for myself

I'm using EDIABAS cable, you could get it from Jarance's group buy last time or from eBay now. Cheers.

 

[Alex5522]

I'm using EDIABAS cable, you could get it from Jarance's group buy last time or from eBay now. Cheers.

Huh..huh..about the EDIABAS i still no manage to setup on my computer and use it. So far i am still using the BMW 1.40 scanner.

 

[cythomas83]

bro aidilj & alex,
may i know how much is ur scanner

 

[Alex5522]

Bro this is the group buy organise by our DIY Master Jarance i bought my scanner:-
http://www.bmwclubmalaysia.com/forums/showthread.php?41969-GB-for-K-D-Can-USB-Cable-%28INPA-compatible%29

http://www.bmwclubmalaysia.com/forums/showthread.php?40554-GB-for-OBD-II-Scanner-for-E46-E39-E85-E83-E38

 

[aidilj]

Been driving the car quite a bit lately and since the conversion couldn't notice any fluctuation or horse galloping when pressing the pedal. Will continue to observe and clear existing code..