Just asking if anyone interested:

[xcrave]

Dear all fellow UDM member.... i recently purchased a set of very high quality ACS Replica TYPE 2 exhaust tip for double exhaust ... this is how it look like on top of my table @ office with my lousy phone ...http://www.bmwclubmalaysia.com/forums/attachment.php?attachmentid=19391

I installed it my self... all i to do is bend the exhaust tip a bit since mine was a bit knocked in (maybe from reversing hit )you can check more pictures here and get the price there:http://cgi.ebay.com/ebaymotors/BMW-E36-E46-ACS-AC-Stainless-Steel-Exhaust-Tip-1-Inlet-/270680117479?pt=Motors_Car_Truck_Parts_Accessories&hash=item3f05cad0e7http://cgi.ebay.com/ebaymotors/BMW-ACS-2-INLET-M3-E46-E90-E60-Z4-EXHAUST-MUFFLER-TIP-/280603975707?pt=Motors_Car_Truck_Parts_Accessories&hash=item41554ce01bOut of ebay the seller offeringUSD 80 for double inlet/outlet USD 65 for single inlet and double outlet .He only accept paypal... this offer for every minimum of 5 set orderOffer include priority shipping from maryland USA (less than 14 days) to my place (paypal require c/c owner)Then i can ship out for everyone who is interested...This is a very high quality stainless steel... (can see from my lousy phone pic also very nice)Just asking if anyone interested... you can contact him yourself if you want to buy also ok since ive seen and installed the item... very very happy to see the item are not like those china tips that use ugly materials... can see from here...http://cgi.ebay.com/ebaymotors/BMW-ACS-2-INLET-E36-E39-M5-E87-Z3-EXHAUST-MUFFLER-TIP-/220795406050?pt=Motors_Car_Truck_Parts_Accessories&hash=item33686e86e2If convert to Malaysia Money will be using paypal set conversion of 3.2xxx so roughly around:USD 80 = RM 256USD 65 = RM 208Poslaju for item will confirm with you guys if really interested...BTW just so you know buying 1 person should cost at least USD 82.99+30 = USD 112.99= RM 361.50so safe RM 100++ at least la if got GB....Hmmm do post if you guys interested... just wanna share not wanna make a big deal out of the item ... if dowan then we just cancel ok guys thx for reading

 

[Alex5522]

Would it be better look if the Exhaust Tip installed exactly flat with the diffuser/bumper, your's was coming out..LOL
Just my 2cents bro.

 

[xcrave]

well i kinda like the effect actually in the end ..

BTW the tip can be cut shorter if needed and send to engineering to mount a screw... cause after installation i actually like the longish look it gave... watch here...

I didnt see any sin in that... beside whats the use of a nice tip if you tuck it in so deep

 

[Alex5522]

In chinese they said good things no need to show wan...ha...ha....btw u hv a set of nice shoes there.

 

[jarance]

xcrave, I think the exhaust tip is sticking too far out. You might burn somebody leg when they walk beside the rear end of the car.

I think it would look nicer if you change the diffuser to match the tips.

 

[Alex5522]

http://www.bmwclubmalaysia.com/foru...Demon-Eyes-amp-Morimoto-H1-Mini-Project/page3

The view of the 2nd pic from your post #21 look a bit long just maybe the angle when u snap the pic i guess.

 

[xcrave]

yeah its the angel to catch as much exhaust tip as i can actually the exhaust tip will not even touch your leg because it is inline with the furthest projection of the rear ... you can actually sense the scale from the above picture...

thanx for all the advice... but like ive said earlier, it may be my lousy angels...

In chinese they said good things no need to show wan...ha...ha....btw u hv a set of nice shoes there.

there is also a saying...

Everything has its beauty, but not everyone sees it...

The shoes are ACS original rims bought by the previous owner...i'm just lucky to get it with the car

 

[xcrave]

This is the set...

But like bro Alex and jarance advised... it should be tucked in far inside... (maybe i'll do just that to see the better effect )

Some of the pictures i saw after thinking twice about letting it 2 inch more than it should...

should have that euro "antic" look

 

[Alex5522]

Just share wt u some of my exhaust tip in diff angle pic installed on my udm :

 

[bmw7833]

Alex, yours is better for me.

 

[xcrave]

Nice one bro... i just modded the exhaust today... waiting the engineering guys finish welding it on Found out the reason why i cant push in further cause there is a mounting on the OEM exhaust preventing me to push in further...

Thx for the sharing Aley... could had been nicer if the Tip was curved tho

 

[xcrave]

This is the method if you have this obstruction in your exhaust tip...

Notice the Exhaust Flap housing... this is what prevents you from those sweet effects...

Modification done to the tips... took about 5 minutes in the engineering shop to open cut a bit and remount... cost ? = RM 15

Final effect...

 

[IanDaddy]

Xcrave, what year/model is your ride ? I think mine CKD 325i does not have that exhaust flap.

 

[xcrave]

yes it does not have so fitment is straight forward for you...

Mine is Jap Spec E46 320i 11/99

it would look something like this for you...