Advise on E36 M40 plug & cable

  • Click here to become an Official Member of BMW Club Malaysia Download Form

5115

Club Guest
Joined
Feb 27, 2007
Messages
564
Points
0
hi all,im driving E36 318 M40.last week wanted to check the condition of my plug but found it's very difficult to pull my plug cable out.here is my questions:1) why tis happen?2) wat if the cable broken?possible take out the plug?3) how much a used & new plug cable (stock not aftermarket) cost?4) wat is the stock plug for my ride?price?for anyone who got leftover plug cable pls offer me.(for sure it must be in good condition la).thanks in advance for ur reply...
 
UGPM bro longan....

btw,wat will happen if only 3 spark plug fuction while the other 1 didn't?
 
then only 3 pistons will fire out of four.. loss of balance
your engine will be bouncing all over the place..
 
thanks mash,my engine din bounce like u said,just vibrate like usual but now when i start my car on the morning,it rev till 1k-1.5k rpm for ard 5-15min on idle mode...

once i drive for more than 15min then everything goes fine..

wonder if tis is result from faulty AFM?

p/s: i did not switch on my A/C on morning
 
Top Bottom