Sealant/Silicone to rebuilt exterior lamps

[Chrix]

Any sifu's here know what type/kind/brand or sealant/silicone to use to re-seal these? ;http://i00.i.aliimg.com/photo/v0/322738414/Park_signal_lamp_for_BMW_3_series.jpgPlanning to remove the lens & do some DIY modding, but I'm wonder what type of sealant to use to glue em back so they wont fall apart from the weather in the future.Thanks guys

 

[bmw7833]

I use the normal silicon which we can get in hardware shop when I opened my headlight last few years. It is easy to use. Important thing is u can reopen the lens easily in case u want to do again. I did the same to my dad' Nissan rear light.

 

[Chrix]

I use the normal silicon which we can get in hardware shop when I opened my headlight last few years. It is easy to use. Important thing is u can reopen the lens easily in case u want to do again. I did the same to my dad' Nissan rear light.

Alrighty, normal sealant thats used for home windows/porcelain sinks?

 

[bmw7833]

This is what i use:

In your case, u better use the clear type.

 

[Chrix]

Was out hunting for these.. only saw white or black.. oh well.. need to search harder.

Thanks man!

 

[banadictaustin]

Generally normal silicon is the best thing for this purpose. I guess bmw7833 has stated it correct. Another thing is that its multi purpose and can be used for things also. This will work out definitely.

 

[Chrix]

Only found huge ones.. feels such a waste buying it & only using a tiny bit..