How To SMOKE Your Signal - CHEAP!

  • Click here to become an Official Member of BMW Club Malaysia Download Form

aRRrgghh

Club Guest
Joined
Dec 10, 2004
Messages
805
Points
18
Frens, Just wanted to share on how u can SMOKE ur signal in an economical way. I found this spray that's called Polycarbonate Smoke Spray. It's a Tamiya product. More details of the product, please click HERE.The spray can looks like this ~
spray.jpg
Purchased it at ToyCity MidValley for RM29.90 - 10% discount ;)Please READ the instructions on the can before use. Before spray ~
before.jpg
before1.jpg
The results ~
after1.jpg
after2.jpg
after5.jpg
After the treatment, the signal lights were still clearly visible ~
after4.jpg
Note: I'm not responsible for any damage that caused from following my DIY here. Do it at ur own risk kekeke B) .Good Luck & Have Fun!! :yahoo: :yahoo:
 
Originally posted by KiNaKa@Dec 4 2005, 11:40 AM
Suggest u do it only with HID....

my 2cents...
HID is also in my next agenda kekekek koyak koyak :nyehehe: :nyehehe:
 
Originally posted by skar19@Dec 4 2005, 11:39 AM
dude where you buy and how much? can get in KL or must order?
Bro, I bought it at ToyCity MidValley lah. It's only RM29.90.. and they gimme 10% discount summore :p
 
a good alternative would be the Enamel one by Gunze.

did it on my E34 some years ago and it's still glossy and clear.

good luck
 
Skar, can get at one-utama also, closer to your place. I tried this before on my old lancer, but flakes off when applied on glass. As per the instructions, it was developed for spraying on polycarbs (i.e. model kits) so i think its best on plastics only. But arrrgghh great job, now what about the rears........................ :eek:k:
 
Originally posted by zaskar@Dec 4 2005, 07:21 PM
Skar, can get at one-utama also, closer to your place. I tried this before on my old lancer, but flakes off when applied on glass. As per the instructions, it was developed for spraying on polycarbs (i.e. model kits) so i think its best on plastics only. But arrrgghh great job, now what about the rears........................ :eek:k:
Thank bro, and yup looks good on plastic. Have tried on diff surface before.. NO NO on the headlights kekekek ..
the rear? errmm.. the left rear has been 'smoked' by the xhaust kekeke.. that's an original ;)
 
Originally posted by nikazwaa@Dec 4 2005, 08:16 PM
Do you still have any of the spray left in the can? :nyehehe:
hehe.. still got I think :nyehehe: :nyehehe:
 
Nice work arghh, good luck on your Headlights next..

Just curious, how does the brightness of this DIY smoked lamps fare agaisnt factory smoked lamps? Are they the same (dimmed) or are the factory smoked ones brighter?

I tried tinting my rear lights and signals before with dark tints bought from Brothers, but the light being emited was bad, thus cud be quite dangerous if im driving at night on a heavy down pour.. hehe sommore my car is black.

Anyway nice job Argghhhh!!
 
sprayed my Brother's Single CD Head Unit with that before. it's not that dark. the original silver color is now looking like bronze. have yet to try on other things.
 
Originally posted by zaskar@Dec 4 2005, 09:35 PM
aRRrgghh, you have stalker behing your car :ph34r: :ph34r: :ph34r:
oohh.. that's my No. 1 fan kekekekek :rofl:
 
wah rizal.....nice job eh!!!
sumore u got a stalker in nikazwaa :p
 
Originally posted by tyke@Dec 5 2005, 05:55 AM
wah rizal.....nice job eh!!!
sumore u got a stalker in nikazwaa :p
ehehe tq.. notice the Jap spec plate? thanks to u dude :D
 
Top Bottom