Rick Wong
Club Guest
- Joined
- Feb 12, 2013
- Messages
- 38
- Points
- 8
In this post i would like to install an alarm set not an OEM set, for car getting old, i can say that some OEM item we can't really afford it, in this DIY I spend RM65 for the setView attachment 29924this is an alarm set View attachment 29925take out the glove boxView attachment 29926the GMV module located at back of glove boxView attachment 29927this is GMV moduleView attachment 29928socket side of GMV, this is control for centre locking, power window, keyless entry, etc, i target the 54 pin socket in the centreView attachment 29931from 54 pin wire set, look for this three wire, blue/red (lock), white/black (unlock), red/blue (door switch), there is only one wire on that colour no same colour wire in that socket anymoreView attachment 29932cut the wire skin (don't cut the wire) test with multi meter make sure not a live wire & connect the alarm set white wire to white/black, brown wire to blue/redView attachment 29933View attachment 29934connect power supply wire from alarm set to corner of GMV that is a live wire & black wire to earth for temporaryView attachment 29935View attachment 29936now it should can trigger lock/unlock function with remote unitView attachment 29939use soldering to make sure all wire said the above not loosen & wire tape it properlyView attachment 29937due to time constrain, i only manage to connect fire wire for the set, the rest of connection like siren, indicator light, key switch, etc... i will upload again see how respond from our club member, no point if no body interested in it.
