E30 2.0 to 2.5 conversion

  • Click here to become an Official Member of BMW Club Malaysia Download Form

opp

Club Guest
Joined
Jan 13, 2005
Messages
261
Points
0
Hey guys,Do you have any idea if I were to swap an E30 2.0 engine to a 2.5 if there is much I need to do? i.e. change computer, airflow sensor etc? Also how much would it cost for the engine? Like to hear from you guys. CheersBRLeon
 
JIPSTER !!!

Read, listen and pay attention !!!! This is it man !!! ....

2.5 Manual ...

Sifus ... let's start the ball rolling ..
 
For real or not! :D

Which 2.5L? M20 or M50? If M20 can get half cut for i thk about 3.5k or so. Total cost probably 5k. M50 means 15k about?

Why bother with 2.5 when you can get the M30 3.5L cheap! :p
 
M30 3.5 "cheap"........drooooool.....*dribble* *dribble*....how cheap lah?....in msia who can do wan?
 
Originally posted by Jipster@Feb 15 2005, 04:09 PM
M30 3.5 "cheap"........drooooool.....*dribble* *dribble*....how cheap lah?....in msia who can do wan?
M30 3.5 maybe cheap but the road tax SUCKS!
 
Jips,

U pretend pretend ony is it ... ??? Our neighbour laa naza2 ....

Wah lau .. I racun 2.5, now u talking 3.5 !! Damnnnnn ...
Ok ok ok .. trow TT at StreetMall ....
 
Originally posted by Jipster@Feb 15 2005, 08:09 AM
M30 3.5 "cheap"........drooooool.....*dribble* *dribble*....how cheap lah?....in msia who can do wan?
Jip

Sure or not? If for real then oni we tok lor. Engine & gear box plus wiring can get about 2k plus i think.
Then get the Hartge Body lit & wheels & you will have the Hartge H35! :D
 
Jips,

2K + oni ... Forget the 2.5 conversion !!!

See .. the MAS-TAH has spoken ....

Control box .. I hv .. Koko Zog oso have ...
 
Lets put it this way....b4 can start anything have to research first lah....with the info then I can make choice lah....then satrt to save up, rob bank, clone credit card u know the usual stuff....

535....set....tomolo....mini TT cyberjaya streetmall....siapa lain boleh datang? ramai2 lah baru best tok kok....eh engkau boleh ke? selalu sibuk aje....
 
H35...menarik tu!

240 bhp @ 5,500 Rpm
320 Nm @ 4,000 Rpm
Top speed 240 KMH
0-100 - 6.4s

ish...ish...ish!!
 
Originally posted by Jipster@Feb 15 2005, 03:30 AM
Lets put it this way....b4 can start anything have to research first lah....with the info then I can make choice lah....then satrt to save up, rob bank, clone credit card u know the usual stuff....

535....set....tomolo....mini TT cyberjaya streetmall....siapa lain boleh datang? ramai2 lah baru best tok kok....eh engkau boleh ke? selalu sibuk aje....
Jips,

Beware of the racun and what you wish for.....you may end up with a car 90% in the workshop and 1% driving to the workshop. :lol: :lol: :lol:
 
Originally posted by Jipster@Feb 15 2005, 08:30 AM
Lets put it this way....b4 can start anything have to research first lah....with the info then I can make choice lah....then satrt to save up, rob bank, clone credit card u know the usual stuff....
Research in Europe. A lot of people has done it. Its easier than putting in an M50
 
Originally posted by bmwky@Feb 15 2005, 09:03 AM
Jips,

Beware of the racun and what you wish for.....you may end up with a car 90% in the workshop and 1% driving to the workshop. :lol: :lol: :lol:
bmwky

My baby is almost ready to tiong you liao. Just a bit more for the ABS then Vroom vroom.
 
want to tiong also don't do around holiday season... afterwards become like the evo in the advertisement... kaboom! ownself terbalik...
 
Originally posted by erica34@Feb 15 2005, 05:39 PM
want to tiong also don't do around holiday season... afterwards become like the evo in the advertisement... kaboom! ownself terbalik...
huh?? which advert???
 
Don't think opp's looking for an M50. 3.5k for a half cut sounds ok. I recall someone stating that 2.3 crank and rods (?) will be 1.8k but is not recommended as the stock 2.0 manifold would be too restrictive?

opp, check out the forum at www.r3vlimited.com for some first class technical E30 racun...
 
Top Bottom