5100 r_m only, duh...

[chikadeez]

well, this has been happening for a few months oledi. everytime i 'tekanan maut' my baby the fuel seems to cut off at around 5100 rpm. redline is at 6000 and max power at 5500 rpm, then why does it cut off so early? obviously there must be a problem with my babe. sigh.anybody had this problem before? or is this the norm. pening lah.......please advice.

 

[Fuhrer]

fuel filter clogged, injectors dirty?
rechip lah..can go to 7k rpm! hehe

 

[chikadeez]

Originally posted by Fuhrer@May 14 2005, 01:31 PM
fuel filter clogged, injectors dirty?
rechip lah..can go to 7k rpm! hehe

bro fuhrer

thanks for the pointers....but i just changed the fuel filter and i better check on the injectors....MIGHT be this buggers giving me headache..... k:

 

[chikadeez]

just found out during the weekend drive from ipoh-kl-ipoh....the fuel cuts in fifth gear at 5100 rpm!!! aiyooooo....must.....find.....the ....antidote.....

 

[wolverine]

Is ur meter calibrated properly? At 5th gear, 5100 rpm...wat speed r u doing?

B)

 

[chikadeez]

Originally posted by wolverine@May 16 2005, 08:31 PM
Is ur meter calibrated properly? At 5th gear, 5100 rpm...wat speed r u doing?

B)

good question and i don't know the answer to that. i was doing 175 km/h at fifth
before it cuts at 5100 rpm. kinda frustrating when u know u still can go for another 500-700 rpm. :dunno:

 

[GeeTRM5]

Could it be 180km/hr speed limiter built into your ECU. It is required by law in Japan that Car's speed are limited to 180km/hr max. Sometimes imported cars are 'detune' and ECU 'reprogrammed' to comply with these parameters.

It's common for local chop shop to bring in half cuts and parts of UDM from Japan nowadays. You may have change something obtained from chop shop lately?

ANYWAY THIS IS JUST A THOUGHT. I MAY BE WRONG ABOUT ALL THESE.

Hope you get the problem sorted out soon.

 

[chikadeez]

Originally posted by GeeTRM5@May 18 2005, 09:09 PM
Could it be 180km/hr speed limiter built into your ECU. It is required by law in Japan that Car's speed are limited to 180km/hr max. Sometimes imported cars are 'detune' and ECU 'reprogrammed' to comply with these parameters.

It's common for local chop shop to bring in half cuts and parts of UDM from Japan nowadays. You may have change something obtained from chop shop lately?

ANYWAY THIS IS JUST A THOUGHT. I MAY BE WRONG ABOUT ALL THESE.

Hope you get the problem sorted out soon.

but i never change anything from chop shop recently.... :dunno: ....maybe previous owner did change something. have to go test the injectors, what to do...trial and error loh...