Rheingold 3.50.32: Perfect software for DIYer

[Nailofar]

Hi Guys,

Recently i managed to install this software to my laptop and connect it to my E90 320d using K+DCAN cable. It is very good software to troubleshoot, diagnose fault, coding, workshop manual and register new battery with step by step guides. if not mistaken, BMW service centers and dealers also using this software.

it took me about two weeks to install and figure out how to connect to my car. here I share back the step by step guides how to install it for our benefit also for my future reference. thanks to bro Aarzeem for his help to install this software.

Step 1: Download the program (prepare space around 25gb)
https://mega.nz/#F!T511WKIZ!hgzzc5RcK2dXatqDc_Q3YA

Step 2: Download and install RC cleaner
https://mega.nz/#!Sp1CxbQA!_0M80KFDeuWVa0T3viKv4V3F6gaNf1vYPQ1ACBIC8tM


Step 3: Download this instruction and follow the instruction how to install the sofware
https://mega.nz/#!kl8DCAIJ!LG5U0LFVjWi_Hca_80esQmsK3vzbzs0CSVVXSvcbMNQ

To connect to E90, you neet K+DCAN can cable and I purchased the cable from here. For F series, you need to buy enet cable.
http://www.ebay.com.my/itm/USB-Interface-OBD2-Cable-for-BMW-INPA-Ediabas-K-DCAN-With-FT232RL-Chip-/281696690085?

To configure K+DCAN cable to E90, you need to install BMW Standard Tools 2.12 and can be downloaded from here. (choose COM9)
http://blog.obdtool.co.uk/free-bmw-standard-tools-2-12-and-installation/

Connect the K+DCAN cable and install the driver and follow this step to set the COM port no (choose COM9)
http://www.osefactory.com/tools/k+dcan/Installation_Manual.pdf

That's it. Connect the cable from OBD2 socket to laptop, start your engine and enjoy!!

Some screenshot:

 

[zidee]

Thanks bro but can't see your screen shot images. Put is at Flickr and share here

 

[Nailofar]

Thanks bro but can't see your screen shot images. Put is at Flickr and share here

Pelik bro. I upload the pictures using photobucket and share the link here. What about others?

 

[jarance]

I can see the pictures.

Where did you buy the cable from and how much?

 

[Nailofar]

I can see the pictures.

Where did you buy the cable from and how much?

I bought from ebay as the link above. RM60++ only.

 

[jarance]

I bought from ebay as the link above. RM60++ only.

Thanks, I think I have the same cable. bought it long time ago and it was much higher.

 

[gimli]

can this work for f series? I have the K+DCAN cable.

 

[Nailofar]

can this work for f series? I have the K+DCAN cable.

U need enet cable for f series.

 

[gimli]

thanks bro :rock:

U need enet cable for f series.

 

[Dave1987]

I bought INPA K+DCAN cable with FTDI chip and a mini CD, USD13.99 incl shipping
http://www.obdii365.com/wholesale/bmw-inpak-can-with-ft232rl-chip.html