Low voltage showing on OBC

  • Click here to become an Official Member of BMW Club Malaysia Download Form

Rick1

Active Member
Joined
Jul 10, 2014
Messages
157
Points
28
HI All,

I have a strange low battery voltage problem. Until recently the voltage on my Dynavin always showed around 14 volts. Last week I managed to totally flatten the battery. Since I got a jump start and recharged the battery the voltage is always showing at 10.2v whilst driving, if I switch off the car and leave it for about an hour the voltage shows 13.9v. The car starts well, I had the battery tested over the weekend and it passed that test, all lights are bright and there is no indication of any actual voltage issues.
Can anyone shed any light as to why the OBC is only reading 10.2v? Do I need to re-register the battery again?

Thanks for your assistance
 
An update on this. For some reason it has fixed itself, the voltage on the OBC is now showing correct "live" voltage. No changes have been made nor has it been to a garage. If only all car problems fixed themselves!!
 
Good to know that the problem solved by itself.

based on my experience, it may come back again. So better to do the "Mandi Bunga" ritual to be on the safe side. hehe
 
Top Bottom