azeL_Inc
Club Guest
- Joined
- Dec 23, 2008
- Messages
- 450
- Points
- 18
Recently, my meter failed (nothing showed at meter, all dead but asc light). Sent to workshop and they replaced the meter with new half cut meter (without even asking me..grr)
Thing is, the meter is different (mine was with miles previously). That's ok. I confirmed that by using my BMW scanner, it is for different model, chasis, VIN didnt match.
Another thing that bothers me is that previously my scanner can read IKE & LCM, but now only IKE & EWS, which nothing shown in EWS but weird "FFFFFFF" figures.
a)Should i be concerned?
b) Why previously it reads LCM, now only EWS?
I attached the results from BMW scanner below, before and after.
Before:
---------------------------------------------------------------------------------------------------------------------------
BMW Scanner v1.4.0.6 (24.05.2008) - P.A.Soft, 2008 HW: V14rFeG Time: 6:48:12 PM 3/24/2013
---------------------------------------------------------------------------------------------------------------------------
FA coding : /-------- IKE --------\ /-------- LCM --------\
Chassis : E46 E46
Model : 318i 318i
Type key : AY72 AY72
Engine : N42B20 N42B20
Gearbox : Automatic Automatic
VIN : FZ92494 FZ93113
Time criterion : 0302 0302
Paint code : 0442 0442
Upholstery code : H9AT H9AT
After
---------------------------------------------------------------------------------------------------------------------------
BMW Scanner v1.4.0.6 (24.05.2008) - P.A.Soft, 2008 HW: V14rFeG Time: 08:59:34 AM 1/24/2014
---------------------------------------------------------------------------------------------------------------------------
ZCS coding : /-------- IKE --------\ /-------- EWS --------\
Chassis : E46
Model : 323i
Type key : AM31
Engine : M52B25
Gearbox : Automatic
VIN : JE93752 WBAAY72040FZ92494
ZCS GM : 66310703-9 FFFFFFFF-P
ZCS SA : 2004880004A21008-J FFFFFFFFFFFFFFFF-E
ZCS VN : 00000000FB-N FFFFFFFFFF-F
Thing is, the meter is different (mine was with miles previously). That's ok. I confirmed that by using my BMW scanner, it is for different model, chasis, VIN didnt match.
Another thing that bothers me is that previously my scanner can read IKE & LCM, but now only IKE & EWS, which nothing shown in EWS but weird "FFFFFFF" figures.
a)Should i be concerned?
b) Why previously it reads LCM, now only EWS?
I attached the results from BMW scanner below, before and after.
Before:
---------------------------------------------------------------------------------------------------------------------------
BMW Scanner v1.4.0.6 (24.05.2008) - P.A.Soft, 2008 HW: V14rFeG Time: 6:48:12 PM 3/24/2013
---------------------------------------------------------------------------------------------------------------------------
FA coding : /-------- IKE --------\ /-------- LCM --------\
Chassis : E46 E46
Model : 318i 318i
Type key : AY72 AY72
Engine : N42B20 N42B20
Gearbox : Automatic Automatic
VIN : FZ92494 FZ93113
Time criterion : 0302 0302
Paint code : 0442 0442
Upholstery code : H9AT H9AT
After
---------------------------------------------------------------------------------------------------------------------------
BMW Scanner v1.4.0.6 (24.05.2008) - P.A.Soft, 2008 HW: V14rFeG Time: 08:59:34 AM 1/24/2014
---------------------------------------------------------------------------------------------------------------------------
ZCS coding : /-------- IKE --------\ /-------- EWS --------\
Chassis : E46
Model : 323i
Type key : AM31
Engine : M52B25
Gearbox : Automatic
VIN : JE93752 WBAAY72040FZ92494
ZCS GM : 66310703-9 FFFFFFFF-P
ZCS SA : 2004880004A21008-J FFFFFFFFFFFFFFFF-E
ZCS VN : 00000000FB-N FFFFFFFFFF-F