Hi guys,Recently I went to tyre shop and did on wheel balancing for F10 520d.What happened was, the tyre guy tried to spin rear tyres and guess what, the DSC error, transmission fault error came out from the meter cluster. I was so freaked out and asked them not to continue the process as it might damage the transmission. Whenever the tyre guy tried to spin the tyre, the parking brake engaged automatically.So my question is, does anyone try on wheel balancing before? is it normal to have error/fault message during the process?Thanks!
On wheel balancing for F10
- Thread starter serenum
- Start date
-
Click here to become an Official Member of BMW Club Malaysia Download Form
christheseed
Club Guest
- Joined
- Dec 20, 2009
- Messages
- 77
- Points
- 0
Go to a better tyre shop, which have high speed balancing machine (off wheel). On wheel balancing old tech already.
affan66;851826 said:
I haven't tried balancing and alignment there yet as I a bit skeptical on their quality of work. But then its not fair to judge that, and I will try one day.
christheseed;851830 said:
Could you please recommend which shop has this high speed balancing equipment? thanks!
masuzu;851839 said:
Meaning they said your tyre is heavy or is it hard to spin the rear tyres?
christheseed
Club Guest
- Joined
- Dec 20, 2009
- Messages
- 77
- Points
- 0
Bro, I'm in Jb. City Tyre Pelangi.
christheseed
Club Guest
- Joined
- Dec 20, 2009
- Messages
- 77
- Points
- 0
pswchan;852365 said:
Hi pswchen,
Any recommend other shop in jb you go? Cos I've been with them for 15 years. Thanks.
- - - Updated - - -
pswchan;852365 said:
Hi pswchen,
Any recommend other shop in jb you go? Cos I've been with them for 15 years. Thanks.
Currently using stock Goodyear Excellence RFT and clocked 50000km with those with 40 percent threadwear left (suprisingly good). Maybe the tyre itself have gone and caused vibrations.
Planning to change those with normal tyres or change the wheels to 18" or 19". What is the recommended offset for F10?
Planning to change those with normal tyres or change the wheels to 18" or 19". What is the recommended offset for F10?
I did mine. They did it off wheel, no issues. Done in Subang area.
Do note that you must make sure they do front, then rear. reason is that you don't want them to mix up the front with the rear, since in mine (528iM, stock), the rear is slightly wider than the front. No issues, they did a good job.
- - - Updated - - -
I did mine. They did it off wheel, no issues. Done in Subang area.
Do note that you must make sure they do front, then rear. reason is that you don't want them to mix up the front with the rear, since in mine (528iM, stock), the rear is slightly wider than the front. No issues, they did a good job.
Do note that you must make sure they do front, then rear. reason is that you don't want them to mix up the front with the rear, since in mine (528iM, stock), the rear is slightly wider than the front. No issues, they did a good job.
- - - Updated - - -
I did mine. They did it off wheel, no issues. Done in Subang area.
Do note that you must make sure they do front, then rear. reason is that you don't want them to mix up the front with the rear, since in mine (528iM, stock), the rear is slightly wider than the front. No issues, they did a good job.
