Chrysler 300C

[zamtresco]

5.7-liter HEMI® V8 engine with Multi-Displacement System (MDS), 340 horsepower at 5,000 rpm, and 390 lb-ft of torque, standard on 300C—the most horsepower and torque in its class.* The MDS system allows the engine to operate on four cylinders when power demands are minimal, increasing fuel efficiency by up to 20 percent. This provides the power of a V8 with the economy of a large V6. (EPA estimated mpg: 17 city/ 25 highway)

 

[zamtresco]

..

 

[zamtresco]

...

 

[zamtresco]

.....

 

[zamtresco]

........

 

[zamtresco]

..............

 

[E46Fanatic]

Originally posted by zamtresco@Jun 7 2005, 01:06 AM
5.7-liter HEMI® V8 engine with Multi-Displacement System (MDS), 340 horsepower at 5,000 rpm, and 390 lb-ft of torque, standard on 300C—the most horsepower and torque in its class.*

Typical American engineering... 5.7 ltrs to squeeze out 340hp and 390NM torque... BMW's needs 5.0 ltrs to squeeze out 500+hp and 500+NM torque from their poweplant in normal aspiration mode.

 

[Juan Powerblow]

Originally posted by zamtresco@Jun 7 2005, 06:06 AM
5.7-liter HEMI® V8 engine with Multi-Displacement System (MDS), 340 horsepower at 5,000 rpm, and 390 lb-ft of torque, standard on 300C—the most horsepower and torque in its class.* The MDS system allows the engine to operate on four cylinders when power demands are minimal, increasing fuel efficiency by up to 20 percent. This provides the power of a V8 with the economy of a large V6. (EPA estimated mpg: 17 city/ 25 highway)

It's the same with my friend's S500L. In normal city mode, it operates on 6-cylinders only but when you stomp it, all 8 cylinders do the a-go-go!

 

[OSFlanker]

Originally posted by E46Fanatic+Jun 7 2005, 02:29 PM-->QUOTE (E46Fanatic @ Jun 7 2005, 02:29 PM)

 

[Jyi1693]

its a fuel guzzeler, so no use having one in malaysia unless you can afford to mantain one.

 

[Vanquish]

Joe Rogan's Sick Fish rocks big time. Glod bless that HEMI power-plant !!! OSF, I think it is push-rod based tech ... not very sure la. Trust the boys at Rad Rides to come up with something that crazy !!!

Cheers,

 

[wkwoo69]

Yes. The Hemi's valvetrain is actuated by pushrods. I think the first performance yank V-8 acutated by belt/gear was the LT-1 'Vette in the early 90's. Nutty country eh, you get these massive gas guzzlin' SUVs driven by one person, but manufacturers have to commit to selling a minimum number of hybrid cars by 2007 or something.

Should check out the estate equivalent to the 300C. I think its a Dodge. Real awesome looking!

 

[E46Fanatic]

Originally posted by OSFlanker@Jun 7 2005, 01:53 AM

The torque is 390 LB FT, not 390 Nm.

ooops... blurr sotong me... Ya, the torque figures is really good then. Just what the yankees like heh.

 

[Jyi1693]

he says that the 'cuda is much better than his 911 turbo.

 

[OSFlanker]

Originally posted by Jyi1693@Jun 8 2005, 11:13 AM
he says that the 'cuda is much better than his 911 turbo.

Di he say "better" or "cooler"? Must watch the program again. I remembered he said cooler, coz on track I doubt the sick fish can beat the 911 turbo.

 

[juggernaut]

Originally posted by zamtresco@Jun 7 2005, 01:06 AM
5.7-liter HEMI® V8 engine with Multi-Displacement System (MDS), 340 horsepower at 5,000 rpm, and 390 lb-ft of torque, standard on 300C—the most horsepower and torque in its class.* The MDS system allows the engine to operate on four cylinders when power demands are minimal, increasing fuel efficiency by up to 20 percent. This provides the power of a V8 with the economy of a large V6. (EPA estimated mpg: 17 city/ 25 highway)

still, typical american cars - butt ugly..

when i was in New York a few months back, this car is everywhere.. driven by mostly african americans with the stereo on so loud, you can hear it from several blocks away... definitely not my type of car - stylewise and imagewise..