Change of Spark Cables

  • Click here to become an Official Member of BMW Club Malaysia Download Form

simonso

Club Guest
Joined
Jan 31, 2009
Messages
136
Points
0
Weirdest thing happen after i changed the spark cable and all 4 spark plugs (4pins),every time i start the ignition, the engine starts and then cuts off..it works find after i try 2 to 3 times.. Anybody experiencing this?
 
simonso;410396 said:
Weirdest thing happen after i changed the spark cable and all 4 spark plugs (4pins),

every time i start the ignition, the engine starts and then cuts off..
it works find after i try 2 to 3 times.. Anybody experiencing this?
did the engine jerk? (like runing on 3 cyclinder instead of 4) or the engine just cut off immediately? next time step on your gas pedal and start your car (dun release the pedal till your engine started), see if the engine still die off
 
It jerked before i changed the cables, it was actually running on 3 cylinder.

After changing, it starts normal but right after 2 seconds the RPM drops to 0 even if i accelerate to 3000 RPM, it just drops.

It seems ok after 2 to 3 tries.

Went for a diagnose check, nothing is wrong.. OMG!
 
try asking your mechanic to check the vacuum hose especially at the back of your engine
 
Top Bottom