Boge absorber for e46

[Alex5522]

Hi All Sifu-SifuCould any one tell me what is the parts number for Boge Front Absorber (L&R) E46 320iThank you and appreciate.

 

[fadzli 325i]

Hi Alex5522,

I just buy one BOGE complete set (Front& rear) this afternoon.
But mine E46 325i. Not sure either can fit to 320i (sifus pls advise?).

325i BOGE Front Absorber:
Part no:31 311 096 853 & 31 311 096 854. Cost me RM350 each side.
Total 700 (L/R). (not sure either cheap or expensive)

Hope this would help you to identify the Part No. and budget of the items.

 

[perryyip73]

alex, when u order the boge absorber, make sure it is 6 cyclinder. 4 cyclinder is different. U can either use 325 if i not mistaken.

 

[Alex5522]

Hi Alex5522,

I just buy one BOGE complete set (Front& rear) this afternoon.
But mine E46 325i. Not sure either can fit to 320i (sifus pls advise?).

325i BOGE Front Absorber:
Part no:31 311 096 853 & 31 311 096 854. Cost me RM350 each side.
Total 700 (L/R). (not sure either cheap or expensive)

Hope this would help you to identify the Part No. and budget of the items.

Hi fadzli

Thanks for your info, me too just get it yesterday $315 each w/o any bushing (Absorber ONLY)
but it's for my 320i.
Parts no :31 31 6 759 561(L)
:31 31 6 759 562(R)

Just for your info my rear window lifter kong also and change the taiwan product cost me $132 w/o elec motor, the ori aboat $300+

All my parts haven't fix yet, will ask my mec to do it later. will update u all . Thnks.

 

[Alex5522]

alex, when u order the boge absorber, make sure it is 6 cyclinder. 4 cyclinder is different. U can either use 325 if i not mistaken.

Hi bro ,

Did u make your ECU upgrade for your lovely UDM liow ? Pls let update me. Thnks.

 

[psv]

Hi fadzli

Thanks for your info, me too just get it yesterday $315 each w/o any bushing (Absorber ONLY)
but it's for my 320i.
Parts no :31 31 6 759 561(L)
:31 31 6 759 562(R)

Just for your info my rear window lifter kong also and change the taiwan product cost me $132 w/o elec motor, the ori aboat $300+

All my parts haven't fix yet, will ask my mec to do it later. will update u all . Thnks.

bro,

care share where u bought the taiwan made window lifter? My front passenger window lifter also kong alredi...

Thanks

 

[Alex5522]

Just sent to fix my absorber tis afternoon but it seem to be some other parts of the lower arms or somewhere else got bad sound.

Need to recheck bck with my mechanic 2morow...

 

[saifuaw]

Is 6 and 4 potter has different spec for absorber?

 

[Alex5522]

Is 6 and 4 potter has different spec for absorber?

Not sure of tat but my mechanic told me all the E46 sedan was design for d same setting. Maybe some other pro's can tell us.

 

[fadzli 325i]

Not sure of tat but my mechanic told me all the E46 sedan was design for d same setting. Maybe some other pro's can tell us.

Hi alex,

Hehe.. May be the upper screw of the absorber not "ketat" properly.. VIRGIN Maa..

Make sure litle bit adjust the Stabilizer Link & make sure the absorber angle is correct.

Don't add any cost to fix that sound if the workshop claim anyhing else.That the problem causes the bad sound.

Fadzli

 

[Alex5522]

Hi alex,

Hehe.. May be the upper screw of the absorber not "ketat" properly.. VIRGIN Maa..

Make sure litle bit adjust the Stabilizer Link & make sure the absorber angle is correct.

Don't add any cost to fix that sound if the workshop claim anyhing else.That the problem causes the bad sound.

Fadzli

Bro u r absolutely right , today i send bck my car to check with my mec and he notice the upper screw was not tight properly. After he tight bck the big screw and now baru i feel the REAL UDM ha..ha...