Reply to thread

Message: <blockquote data-quote="macgy" data-source="post: 280359" data-attributes="member: 303"><p>part 3, step by step temporary fix. 1. drill a hole to both adjuster, 2. slot in the wire(use longer wire, u can cut it short later), 3. tighten up the wire connector (with plastic removed) near the adjuster, 4. slot the wire through the holder on the lamp, 5. slot in the brown rubber n the 2nd wire connector (plastic not removed) but don't tighten it at this stage, 6. now u can reinstall the lamp, put every thing back in place, don't install the front cover at this stage. 7. with every thing in place, pull the cables tight at the other end n tighten the 2nd wire connector(at both adjusters), 8. finally cut the excess cable n install the plactic lamp cover. hope it help guys.</p></blockquote><p></p>