Reply to thread

Message: <blockquote data-quote="azeL_Inc" data-source="post: 28837" data-attributes="member: 15688"><p>I sent my car for a complete diagnostics, change bumper etc & repaint, and when it came back, few things have changed (the shop said he reprogrammed):Before: No signal light blink when unlock, only cabin light lit up - After: blink twice when unlocking - LIKEBefore: when i press lock, if one of the door arent closed properly, it will still lock, but no light - After: the light blink anyway, even if one door not closed. - DISLIKE coz now i wont know from the light, if a door is not properly closed. Had a case where i left the car with one door not properly close, overnight!Before: Used to be able to open the trunk (by pressing remote) any time, even when locked - After: need to unlock before able to open trunk - DISLIKE, need to press twice to open trunk to keep my groceries.Before: no autolock - After: now auto lock when pass 30km/h - LIKEBefore: pressing unlock will unlock all doors. After: Pressing once will only unlock driver's door, twice will unlock all - LIKE1. Out of curiousity, juz to be sure that none of my hardware has been changed, can all of the things i mentioned above be changed, with only programming? (no hardware change involved)2. If yes, How do i do the change/reprogram DIY style? i have the cable for OBDII that got from Group buy before, hehe, any hint? I wish to change the things that i dislike.</p></blockquote><p></p>