Reply to thread

Message: <blockquote data-quote="VKS" data-source="post: 406544" data-attributes="member: 8293"><p>I just did my own oil change couple of days back after 10k BSRI..after replacing filter and added 6.5L while i was driving from workshop i start to check the oil level and it showed half way between min and max...then called the mech and was told it needs at least 6k to run in for you to see the actual oil level after pressurised..later i found the oil level was on max level as told by the mech..so in your case how come the idrive detect the oil level so soon..? If the oil level was below minimum then i dont think 1L was sufficient to fill the 6potter showing straight full...hmm</p></blockquote><p></p>