Reply to thread

Click here to become an Official Member of BMW Club Malaysia Download Form

Message: <blockquote data-quote="aidilj" data-source="post: 24224" data-attributes="member: 20536"><p>Hi Guys, a little sharing on how to turn recirculated air memory function on using DIS/GT1. Info on how to install DIS is here <a href="http://www.bmwclubmalaysia.com/forums/showthread.php?40618-EasyDIS-44-and-INPA-working" target="_blank">http://www.bmwclubmalaysia.com/forums/showthread.php?40618-EasyDIS-44-and-INPA-working</a>, or if you are at the mechanic's to diagnose, might as well jump on him to get this done. I a few times had forgotten to block outside air recirculation, and passengers teased me for messing with the vehicle too much.. while in reality that was the default behavior. :stupid:I may have missed some screens in the process so please bear with me. When doing the actual programming, I had to turn the key to ACC/position 1 and program, not as the screen instructed (ignition off and on again). Probably related to the interface in use. Hope this helps somebody...CheersAidilLaunch DIS and click on Coding/Program. This button only available to v44 not v57<img src="http://i791.photobucket.com/albums/yy197/aidilj/ihka/3.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Click on car memory<img src="http://i791.photobucket.com/albums/yy197/aidilj/ihka/15.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Connect interface, turn ignition on, and click the right green button<img src="http://i791.photobucket.com/albums/yy197/aidilj/ihka/17.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />During my autodetect, this error pops out as the factory radio was removed for obvious reason. Click yes<img src="http://i791.photobucket.com/albums/yy197/aidilj/ihka/10.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Autodetect runs again and comes this screen, choose HVAC (number 8)<img src="http://i791.photobucket.com/albums/yy197/aidilj/ihka/11.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Then choose flaps then recirculated air memory<img src="http://i791.photobucket.com/albums/yy197/aidilj/ihka/12.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Mine was not activated<img src="http://i791.photobucket.com/albums/yy197/aidilj/ihka/13.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Activate then check the same page, note that setting are not written yet<img src="http://i791.photobucket.com/albums/yy197/aidilj/ihka/14.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Go back to main page car memory page, scroll down and choose set vehicle<img src="http://i791.photobucket.com/albums/yy197/aidilj/ihka/19.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />This page summarizes changes you have made and will be written<img src="http://i791.photobucket.com/albums/yy197/aidilj/ihka/18.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />Here is where I need to turn switch to ACC/position 1 to program, toggling ignition doesn't work, click yeshttp://i791.photobucket.com/albums/yy197/aidilj/ihka/20.pngSuccessful programhttp://i791.photobucket.com/albums/yy197/aidilj/ihka/21.pnghttp://i791.photobucket.com/albums/yy197/aidilj/ihka/22.pngDoublechecking, guess the asterisk shows the default factory option. Have fun!http://i791.photobucket.com/albums/yy197/aidilj/ihka/23.png</p></blockquote><p></p>

Verification