Reply to thread

Message: <blockquote data-quote="fabianyee" data-source="post: 361129" data-attributes="member: 6">What I did was to zigzag the cable tie heads to reduce the gap between the ties... but first of all, make sure that the rubber hoses are in good condition... and don't use too much force to tighten the cable ties, u don't want to 'choke' the hoses.. Just enuf force to keep them in place on the hoses.. Short and small cable ties would be sufficient... Another benefit is that the cable ties oso protect the hoses from scrubbing on anything that may come in contact with the hoses.. Easy and cheap mod... And it works.. Reduce brake fade tremendously when I was driving it on track...</blockquote>