Reply to thread

Message: <blockquote data-quote="gendong" data-source="post: 742287" data-attributes="member: 22402">By now, you would have know that a conversion as you mentioned is not a simple one as it requires you to change almost everything.Most of the shop would prefer to provide the half cut/parts themselves, due to the fact you can claim 'warranty' from them from any issues risen from the conversion. I went around a few shops for a straight swap (same capacity engine) but was met with a polite 'no'. reason being they do not want to be held responsible if the conversion is a failure. A risk to them when the engine fails and the customer starts blaming them.I swapped mine at a mech in Shah Alam. That is after i convinced him that it was a matter of taking down the old engine and replace that with the new engine. All risk on me, only the he agreed.all the best bro!</blockquote>