Reply to thread

Click here to become an Official Member of BMW Club Malaysia Download Form

Message

As aoch88 says, Taiwan kit will have some small gaps, my front lip had at the most a 0.5 mm gap at certain curvy bits. Original is super nice but they cost about 3-4 times more. I chose Taiwan because of our road condition. I started out wanting a front lip to protect my original bumper. Easy to sacrifice the Taiwan stuff la. With a good shop they can make a Taiwan kit well fitted. My 3D Design Taiwan front lip was too long. After fitting you can see a 1/4" gap on one end. Somehow they 'removed' it. It was nice.

[QUOTE="tIANcI, post: 600951, member: 25377"] As aoch88 says, Taiwan kit will have some small gaps, my front lip had at the most a 0.5 mm gap at certain curvy bits. Original is super nice but they cost about 3-4 times more. I chose Taiwan because of our road condition. I started out wanting a front lip to protect my original bumper. Easy to sacrifice the Taiwan stuff la. With a good shop they can make a Taiwan kit well fitted. My 3D Design Taiwan front lip was too long. After fitting you can see a 1/4" gap on one end. Somehow they 'removed' it. It was nice. [/QUOTE]

Verification