Damian@FI
Club Guest
- Joined
- Aug 29, 2009
- Messages
- 5
- Points
- 0
DuringObviously, because there's still some dusting from the Paint Correction on some of the panels.
You can literally ssee the individual layers of Clear over Base coats in this imagehttp://img24.imageshack.us/img24/9922/rubym3during11.jpghttp://img30.imageshack.us/img30/6504/rubym3during12.jpg
CompleteAfter FI SEAL, a three hour accelerated cure and 1 x Zymol Royale applied as the customer waited. I told him I was applying Zymol Royale and he kinda shrugged his shoulders, he has no idea. http://img27.imageshack.us/img27/1481/rubym3complete01.jpghttp://img23.imageshack.us/img23/1690/rubym3complete02.jpghttp://img3.imageshack.us/img3/5788/rubym3complete03.jpghttp://img23.imageshack.us/img23/880/rubym3complete04.jpghttp://img3.imageshack.us/img3/8451/rubym3complete05.jpghttp://img39.imageshack.us/img39/4405/rubym3complete06.jpghttp://img30.imageshack.us/img30/9941/rubym3complete07.jpghttp://img30.imageshack.us/img30/5396/rubym3complete08.jpghttp://img27.imageshack.us/img27/5228/rubym3complete09.jpghttp://img3.imageshack.us/img3/9791/rubym3complete10.jpghttp://img24.imageshack.us/img24/3529/rubym3complete11.jpg
All images are (apart from id removal on 5 images and watermark) straight from the camera. I thought I'd mention this because I showed a customer today and he said that it looked as though the 'shine' in 2 shots were photoshop.As usual, every 3 months this customer is in for a Custom Service.Today was a 6 hour treatment, documented with Still Images & Video.Beforehttp://img198.imageshack.us/img198/7377/before04h.jpghttp://img188.imageshack.us/img188/6959/before03e.jpghttp://img198.imageshack.us/img198/874/before02.jpghttp://img14.imageshack.us/img14/195/before01u.jpg_____________________
Badge RemovalTo make sure there were no outlines revealing where the badge was, I have wetsanded and thoroughly polished the area after removal.http://img39.imageshack.us/img39/9469/badgebefore.jpghttp://img188.imageshack.us/img188/6708/badgeafter.jpg
Front Bar WetsandThe customer had some paintwork carried out recently and there was a tonne of overspray left behind on the front splitter.I couldn't remove it 100% with anything and had to wetsand this section as well.http://img199.imageshack.us/img199/6584/frontsplitterbefore.jpghttp://img14.imageshack.us/img14/9467/frontsplitterafter.jpg
Wheel CleanCleaned with a Low Water Wheel Clean Kit[youtube]QQJCVVKwYWw[/youtube]
Tyre PrepA GPC dwelling and a Microfibre Wheel Clothhttp://img14.imageshack.us/img14/8937/gpcdwell.jpg[youtube]1SOLvdKA5EU[/youtube]
Tyre DressingMid-Sheen Tyre Dressing and a wipedown with a Microfibre Wheel Cloth[youtube]wbERggql2ZE[/youtube]
Low Water Prep WashWith QEW, a 30L Wash Tube and a Microfibre Wash Mitt.[youtube]ZpW12CCzvPE[/youtube]
DryingDrying with a Paintwork Cloth (to minimise marring from any leftover debris) and Boost to lubricate and clean surface to check for imperfections.[youtube]dXfxWQiv5-8[/youtube]
CompleteStunning. LSP = SEAL x2 + Royale x1.Royale Bondinghttp://img682.imageshack.us/img682/2550/m3complete02.jpghttp://img134.imageshack.us/img134/4468/m3complete12.jpghttp://img141.imageshack.us/img141/9243/m3complete11.jpghttp://img682.imageshack.us/img682/7469/m3complete10.jpghttp://img134.imageshack.us/img134/8651/m3complete09.jpghttp://img252.imageshack.us/img252/7530/m3complete08.jpghttp://img269.imageshack.us/img269/8938/m3complete07.jpghttp://img269.imageshack.us/img269/4393/m3complete06.jpghttp://img141.imageshack.us/img141/263/m3complete05.jpghttp://img134.imageshack.us/img134/3990/m3complete04.jpghttp://img252.imageshack.us/img252/1948/m3complete03.jpghttp://img269.imageshack.us/img269/262/m3complete01.jpghttp://img141.imageshack.us/img141/6185/m3complete13.jpg
I hope you like,d.
CompleteAfter FI SEAL, a three hour accelerated cure and 1 x Zymol Royale applied as the customer waited. I told him I was applying Zymol Royale and he kinda shrugged his shoulders, he has no idea. http://img27.imageshack.us/img27/1481/rubym3complete01.jpghttp://img23.imageshack.us/img23/1690/rubym3complete02.jpghttp://img3.imageshack.us/img3/5788/rubym3complete03.jpghttp://img23.imageshack.us/img23/880/rubym3complete04.jpghttp://img3.imageshack.us/img3/8451/rubym3complete05.jpghttp://img39.imageshack.us/img39/4405/rubym3complete06.jpghttp://img30.imageshack.us/img30/9941/rubym3complete07.jpghttp://img30.imageshack.us/img30/5396/rubym3complete08.jpghttp://img27.imageshack.us/img27/5228/rubym3complete09.jpghttp://img3.imageshack.us/img3/9791/rubym3complete10.jpghttp://img24.imageshack.us/img24/3529/rubym3complete11.jpg
All images are (apart from id removal on 5 images and watermark) straight from the camera. I thought I'd mention this because I showed a customer today and he said that it looked as though the 'shine' in 2 shots were photoshop.As usual, every 3 months this customer is in for a Custom Service.Today was a 6 hour treatment, documented with Still Images & Video.Beforehttp://img198.imageshack.us/img198/7377/before04h.jpghttp://img188.imageshack.us/img188/6959/before03e.jpghttp://img198.imageshack.us/img198/874/before02.jpghttp://img14.imageshack.us/img14/195/before01u.jpg_____________________
Badge RemovalTo make sure there were no outlines revealing where the badge was, I have wetsanded and thoroughly polished the area after removal.http://img39.imageshack.us/img39/9469/badgebefore.jpghttp://img188.imageshack.us/img188/6708/badgeafter.jpg
Front Bar WetsandThe customer had some paintwork carried out recently and there was a tonne of overspray left behind on the front splitter.I couldn't remove it 100% with anything and had to wetsand this section as well.http://img199.imageshack.us/img199/6584/frontsplitterbefore.jpghttp://img14.imageshack.us/img14/9467/frontsplitterafter.jpg
Wheel CleanCleaned with a Low Water Wheel Clean Kit[youtube]QQJCVVKwYWw[/youtube]
Tyre PrepA GPC dwelling and a Microfibre Wheel Clothhttp://img14.imageshack.us/img14/8937/gpcdwell.jpg[youtube]1SOLvdKA5EU[/youtube]
Tyre DressingMid-Sheen Tyre Dressing and a wipedown with a Microfibre Wheel Cloth[youtube]wbERggql2ZE[/youtube]
Low Water Prep WashWith QEW, a 30L Wash Tube and a Microfibre Wash Mitt.[youtube]ZpW12CCzvPE[/youtube]
DryingDrying with a Paintwork Cloth (to minimise marring from any leftover debris) and Boost to lubricate and clean surface to check for imperfections.[youtube]dXfxWQiv5-8[/youtube]
CompleteStunning. LSP = SEAL x2 + Royale x1.Royale Bondinghttp://img682.imageshack.us/img682/2550/m3complete02.jpghttp://img134.imageshack.us/img134/4468/m3complete12.jpghttp://img141.imageshack.us/img141/9243/m3complete11.jpghttp://img682.imageshack.us/img682/7469/m3complete10.jpghttp://img134.imageshack.us/img134/8651/m3complete09.jpghttp://img252.imageshack.us/img252/7530/m3complete08.jpghttp://img269.imageshack.us/img269/8938/m3complete07.jpghttp://img269.imageshack.us/img269/4393/m3complete06.jpghttp://img141.imageshack.us/img141/263/m3complete05.jpghttp://img134.imageshack.us/img134/3990/m3complete04.jpghttp://img252.imageshack.us/img252/1948/m3complete03.jpghttp://img269.imageshack.us/img269/262/m3complete01.jpghttp://img141.imageshack.us/img141/6185/m3complete13.jpg
I hope you like,d.