Reply to thread

Message

<blockquote data-quote="saat" data-source="post: 1448" data-attributes="member: 77"><p>In response to an earlier query on radio internal setting, following is my input.&nbsp; Do fill in the blanks or correct me, if I am wrong.To get to the setting, follow the following steps:1.&nbsp; Turn off the radio,2.&nbsp; Turn on the radio and press the &quot;M&quot; button until the display changed,3.&nbsp; Use the &quot;+&quot; or &quot;-&quot; buttons to scroll down the following settings:- SV39-98 41 - ? Not sure, Serial Number I think....- GAL - Speed sensitive volume increase.&nbsp; Each volume increment shown is the change (increase) in system volume as the speed increases by 10 Kmh above a certain speed.&nbsp;&nbsp; 1-Lowest&nbsp;&nbsp; 6-Highest- DSP 1.6 - Digital Sound Processor setting (only for models fitted with DSP sound system.&nbsp; Not applicable to most of us in Malaysia- TP-V - Traffic report volume, this is the increase in volume whenever a&nbsp; traffic report is being delivered by some radio stations (but not in Malaysia I think) and the TP setting is ON&nbsp;&nbsp; -9-Lowest&nbsp;&nbsp; +9-Highest- AREA - Region Setting for radio frequency.&nbsp; ECE-Europe&nbsp; US-US&nbsp; CAN-Canada&nbsp; OCE-Oceania/Asia pacific- AF - Automatic Frequency search, when you press the up or down buttons or the &quot;+&quot; or &quot;-&quot; buttons in serach for a radio station, in auto mode, the radio will look for the next avilable strong signal but in manual mode it will go up in small increments until you stop:&nbsp; OFF=manual,&nbsp; ON=Automatic</p></blockquote><p></p>

[QUOTE="saat, post: 1448, member: 77"] In response to an earlier query on radio internal setting, following is my input. Do fill in the blanks or correct me, if I am wrong.To get to the setting, follow the following steps:1. Turn off the radio,2. Turn on the radio and press the "M" button until the display changed,3. Use the "+" or "-" buttons to scroll down the following settings:- SV39-98 41 - ? Not sure, Serial Number I think....- GAL - Speed sensitive volume increase. Each volume increment shown is the change (increase) in system volume as the speed increases by 10 Kmh above a certain speed. 1-Lowest 6-Highest- DSP 1.6 - Digital Sound Processor setting (only for models fitted with DSP sound system. Not applicable to most of us in Malaysia- TP-V - Traffic report volume, this is the increase in volume whenever a traffic report is being delivered by some radio stations (but not in Malaysia I think) and the TP setting is ON -9-Lowest +9-Highest- AREA - Region Setting for radio frequency. ECE-Europe US-US CAN-Canada OCE-Oceania/Asia pacific- AF - Automatic Frequency search, when you press the up or down buttons or the "+" or "-" buttons in serach for a radio station, in auto mode, the radio will look for the next avilable strong signal but in manual mode it will go up in small increments until you stop: OFF=manual, ON=Automatic [/QUOTE]

Verification