Reply to thread

Message: <blockquote data-quote="zidee" data-source="post: 518421" data-attributes="member: 20151">Moots,Thanks. I will try again. Another DIY link is as below. Yes there are 2 torx bolts. I will try to remove the one behind the glass.Credit to BMWTIPS a per link below :8) Roll down the window about 80% down. Using a torx T20 driver, unscrew this torx/washer combination.9) Manually, pull the window up to the very top/fully closed position. It should stay put there. You can also ask someone to hold it to make sure it stays in this fully closed position or alternatively you can use some tape.10) Remove the bottom bolt also using the 10mm crescent wrench.[ATTACH]19347[/ATTACH]11) Ok, see this top starburst shaped bolt in the picture below? It's behind that soft plastic window. No, you don't get to it that way. It's also behind the glass window. If it weren't you could use a straight hex bolt driver but life isn't that easy. Get your 10mm crescent wrench, and stick your hand under the sheet metal and reach behind the window glass and remove the bolt.[ATTACH]19348[/ATTACH]<a href="http://www.bmwtips.com/tipsntricks/WindowRegulator/regulator.htm" target="_blank">http://www.bmwtips.com/tipsntricks/WindowRegulator/regulator.htm</a></blockquote>