Reply to thread

Message

<blockquote data-quote="JTK" data-source="post: 756546" data-attributes="member: 62094">1)Open E-sys and chose connection via Vin and press connect2) [ATTACH]5949[/ATTACH] Select F010 Without Direct 3)Select Expert Mode - Coding ,Read &amp; Save - Edit4)Expand the FA list folder until SALAPA-Element is show5)Select SALAPA-Element Folder then add 6WB at bottom box 6)[ATTACH]5950[/ATTACH] 1.save &gt; 2.select file and calculate FP &gt; 3.save at file7)Select Expert Mode &gt; VCM &gt; 1. Load you FA file&nbsp; &gt; 2. Right-click on FA and Calculate FP again [ATTACH]5951[/ATTACH]8) 1.Select VCM Master &gt;&nbsp; 2. Click on the Write FA FP button[ATTACH]5952[/ATTACH]9)Expect Mode &gt; Coding &gt; Read FA file &gt; Click FA file &amp; Activate FA[ATTACH]5953[/ATTACH]10) Read SVT[ATTACH]5954[/ATTACH]11)[ATTACH]5955[/ATTACH] Left Click Dkombi &gt; Click Detect CAF for SWE &gt; Select the CAFD Latest Version[the bigger number] &gt; Select OK &gt; Right Click on DKombi &gt; Select Code~Finish~Item Needed :OBD Enet Cable arround RM2-3X &amp; 6WBSoftware Needed : E-sys &amp; PSdZData*Lite Version is enough*&nbsp;Please do it by u own risk, make sure backup Old Device FA file</blockquote>

[QUOTE="JTK, post: 756546, member: 62094"] 1)Open E-sys and chose connection via Vin and press connect 2) [ATTACH]5949[/ATTACH] Select F010 Without Direct 3)Select Expert Mode - Coding ,Read & Save - Edit 4)Expand the FA list folder until SALAPA-Element is show 5)Select SALAPA-Element Folder then add 6WB at bottom box 6)[ATTACH]5950[/ATTACH] 1.save > 2.select file and calculate FP > 3.save at file 7)Select Expert Mode > VCM > 1. Load you FA file > 2. Right-click on FA and Calculate FP again [ATTACH]5951[/ATTACH] 8) 1.Select VCM Master > 2. Click on the Write FA FP button[ATTACH]5952[/ATTACH] 9)Expect Mode > Coding > Read FA file > Click FA file & Activate FA[ATTACH]5953[/ATTACH] 10) Read SVT[ATTACH]5954[/ATTACH] 11)[ATTACH]5955[/ATTACH] Left Click Dkombi > Click Detect CAF for SWE > Select the CAFD Latest Version[the bigger number] > Select OK > Right Click on DKombi > Select Code ~Finish~ Item Needed :OBD Enet Cable arround RM2-3X & 6WB Software Needed : E-sys & PSdZData*Lite Version is enough* Please do it by u own risk, make sure backup Old Device FA file [/QUOTE]

Verification