Reply to thread

Click here to become an Official Member of BMW Club Malaysia Download Form

Message: <blockquote data-quote="haywire" data-source="post: 545805" data-attributes="member: 16474">I have replaced my control arms and tie rods during the replacement of my absorbers last month.That's on my 'nice to have' list at the moment but there's just too many stuff I wanted to do to the car at the moment so wont be happening anytime soon.I have the picture of my wiring harness for the rear blind now:<img src="http://farm7.static.flickr.com/6151/6174111330_b961509089_z.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Wiring harness consisting of one 3 pin male plug (middle pin empty), 6.5 meters of wires and 2 exposed pins.<img src="http://farm7.static.flickr.com/6152/6174111334_f983cb1029_z.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Closeup of male plug<img src="http://farm7.static.flickr.com/6166/6174111338_803b77d030_z.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Closeup of exposed pinsSo when you have this harness you need to connect it to the centre console switch plug:<img src="http://farm7.static.flickr.com/6168/6174111316_0b4b477043_z.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://farm7.static.flickr.com/6153/6174111324_6bfdf618e2_z.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Close-up of disassembled plug. The pins are numbered on the plug, you will need to push the two pins into No. 14 and 15 (bottom left of the plug)<img src="http://farm7.static.flickr.com/6177/6174111328_37bcd60786_z.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Closer look, you can see that No. 14 and 15 is empty now. Currently I'm not sure if it matters which wire goes to 14 and 15. Some say it doesn't matter and some say it does matter which way it goes. I'll test this further when my switch gets here.</blockquote>

Verification