Reply to thread

Message: <blockquote data-quote="carlsberg" data-source="post: 626658" data-attributes="member: 21454">ok, just got the rattle and stall, after than, 10 starts perfectly..... seems to only happen after 10 minutes or so, and just the once..... this with original flow meter, so id say count that out, as 2 meters give identical performance....   so far the engine has had, new crank sensor, known good cam sensor, known good airflow sensor, new knock sensors, new vacuum hoses as required, new aircleaner element, ICV cleaned completly ( tried the car yesterday with this disconnected, less RPM at start up, but could still here rattle for shorter time before the engine stalled), recent plugs, and i swopped in a known good coil pack too....other than this rattle and stall, the car runs great, perfect smooth idle, strong acceleration, and revs through to 6000 rpm+ on kickdown.   the engine for 320k milage is smooth and silent..... almost zero oil consumption on toyota mineral changed every 3000k---- car is run on 95 octane</blockquote>