18 inch rims for sale.

[smike]

Anybody out there looking for 18 inch rims. Well i have got with tires. Only 3 of the tires are in very good condition. Tires are less than 6 months old. Going cheap. With tires at RM800.00. Pls contact me asap if you are interested by sending me a message. :cheers:

 

[V-Man]

A price hard to beat ! FREE Bump for this bargain

 

[slyder]

If only they were 17". i would take it off your hands immediately

 

[smike]

If only they were 17". i would take it off your hands immediately

Bro Slyder for 17, if you can wait i am thinking of getting rid of my racing dynamics rims ori. In the mean time i am looking for BBS 17 inch to replace them. Let me know bro. :cheers:

 

[V-Man]

^ The RD on ur 34 perfect already larr bro Nevertheless I'm a BBS fan too

 

[JFT63]

Wey, this is the best buy....sadly no takers yet..free bumpzzz

 

[slyder]

Bump Bump free bump. If your rd is with the correct et for e36 will definately take if the price is right let me know cheers

 

[smike]

^ The RD on ur 34 perfect already larr bro Nevertheless I'm a BBS fan too

Ya la bro, the RD is ok but this BBS is really racuning me la. Especially the deep dish type. Bro you know if there is any out there pls pm me bro. :cheers:

 

[V-Man]

^ You find a way to hijack ICeMAN's 36 then you can have a nice set of RC090 on you 34. But careful, some say he got a parang under his seat...hahaha

Will let you know if any come by..

 

[Pez]

Bro, this can fit E90??

 

[smike]

Bro, this can fit E90??

Bro i really wouldn't know. Best would be if you are really interested, message me and come over to my place and there is tire shop just new my house. We can check it out there. :cheers:

 

[V-Man]

^
E90 & E34 same center hub size 72.5, but offsets are different. E90 - ET 30-45, E34 - ET 13-20

 

[smike]

^
E90 & E34 same center hub size 72.5, but offsets are different. E90 - ET 30-45, E34 - ET 13-20

Bro thks for helping out, means can use or cannot. I would appreciate if you could help me out by stating which model can use these rims of mine. Thanks again.
:cheers:

 

[slyder]

If i am not mistaken based on the numbers provided by v-man, the rim if fitted on the e90, the e90 might have to do wide body if i am not mistaken.

http://www.raceandroad.com/technical-help/alloy-wheel-offset.html

 

[V-Man]

1 Series E81/82/87/88 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 35-45

3 Series E21 = PCD 4x100, centre bore 57.0mm and M12x1.5 bolt thread. ET 12-20

3 Series E30 = PCD 4x100, centre bore 57.0mm and M12x1.5 bolt thread. ET 15-35
3 Series E30 M3 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 27-30

3 Series E36 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 30-47
3 Series E36 M3 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 35-47

3 Series E46 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 30-47
3 Series E46 M3 = PCD 5x120 centre bore 72.5mm and M12x1.5 bolt thread. Fronts ET 30-47, Rears ET 20-27,

3 Series E90/91/92/93 = PCD 5x120, Centre bore 72.5mm and M12x1.5 bolt thread. ET 30-45
3 Series E90/92/93 M3 = PCD 5x120, Centre bore 72.5mm and M12x1.5 bolt thread. ET 34-37

5 Series E28 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 18-25

5 Series E34 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 13-20
5 Series E34 M5 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread.

5 Series E39 = PCD 5x120, centre bore 74.0mm and M12x1.5 bolt thread. ET 15-25
5 Series E39 M5 = PCD 5x120, centre bore 72.5.0mm and M12x1.5 bolt thread. ET 15-25

5 Series E60/61 = PCD 5x120 centre bore 72.5mm and M12x1.5 bolt thread. ET 15-32
5 Series E60 M5 (Saloon) = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 12-32
5 Series E61 M5 (Touring) = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 12-32

6 Series E24 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread.

6 Series E63/64 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 14-20
6 Series E63/64 M6 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 12-20

7 Series E32 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 19-26

7 Series E38 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 13-25

7 Series E65/66/67/68 = PCD 5x120, centre bore 72.5mm and M14x1.5 bolt thread. ET 10-25

8 Series E31 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread.

X3 E83 = PCD 5x120, centre bore 72.5mm and M14x1.5 bolt thread. ET 40-45

X5 E53 = PCD 5x120, centre bore 72.5mm and M14x1.5 bolt thread. ET 40-45

X5 E70 = PCD 5x120, centre bore 74.0mm and M14x1.25 bolt thread. ET 37-53

X6 E71 = PCD 5x120, centre bore FRONT 74.0mm, centre bore REAR 72.5mm and M14x1.5 bolt thread.

Z1 E30Z = PCD 4x100, centre bore 57.0mm and M12x1.5 bolt thread.

Z3 E36 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 30-40

Z3 M Coupe/M Roadster = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread.

Z4 E85 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread. ET 45-52

Z8 E52 = PCD 5x120, centre bore 72.5mm and M12x1.5 bolt thread.

 

[V-Man]

If i am not mistaken based on the numbers provided by v-man, the rim if fitted on the e90, the e90 might have to do wide body if i am not mistaken.

http://www.raceandroad.com/technical-help/alloy-wheel-offset.html

Yup, but not widebody necessarily. Same like ICEMAN using a 5sili Style5's on his 3sili. Smaller tyres, fender rolling, pulling...etc may be required. Depends... really depends. Wanna do can do.

 

[smike]

Bro V-Man, does that means, all the info you have given above can use the rims i am selling off. Right or Wrong. And thanks for the info bro. U have been very helpful and i really appreciate this. Thanks a lot. :cheers:

 

[V-Man]

^ Not all the models above are same. The specs are there so you can compare them.

 

[ICEMAN 68]

^ You find a way to hijack ICeMAN's 36 then you can have a nice set of RC090 on you 34. But careful, some say he got a parang under his seat...hahaha

Will let you know if any come by..

weiii don't larr like this .... yehh i've got one set but not fully re-furbished ...but if you do want mine ( which is in my current ride ) offer me a price tag that i can't resist and this is as good as it is ...immediately can plonk in

 

[slyder]

IceMan Can I offer you Special service that you cannot resist for me to plonk in